User's Manual

ManualsBrandsHaven Technologies ManualsAudio EquipmentHEADSET

HH-250BHP User Manual

Creation Date:

uly 23, 2020

Revision No: V.1.0

Revision Date:

July 23

, 2020 1/

MODEL NUMBER: HH-250BHP

LEVEL DEPENDENT HEADSET WITH BLUETOOTH

Locations of Controls

1. MultiFunction Button

2. Bluetooth Volume Up

3. Bluetooth Volume Down

4. Hunting Volume Up

5. Hunting Volume Down

6. Bluetooth Mic

7. Battery Cover

8. USB Micro Charging Port

9. Charge Indicator

Battery Installation

Either 3 x AAA sized battery or Tailor Made Lithium Battery can be used.

1. Lithium Battery:

Ensure that the On/Oﬀ Knob is switched oﬀ.

Open the Battery Cover. Insert the tailor-made Lithium Battery into the battery compartment and plug the

battery cord into the Power Connector in correct direction. Close the Battery Cover.

The manufacturer provides the tailor-made Lithium Battery. Other types of Lithium Batteries are not recommended.

AAA Sized Batteries:

Turn off the headset. Open the battery cover, insert 3 pieces AAA sized batteries in correct polarity. Close

the battery cover.

Power On/Off/Pair

−

Press and hold Multi-Functional button (1) for 2 seconds: Power On

−

Press and hold Multi-Functional button (1) for 3 seconds: Power Off

−

4 hours auto power off

Goggle Assist/Siri

−

Press and hold Multi-Functional button (1) for 1 second: Google Assist/Siri

Music

−

Single Press MultiFunction button (1): Play/Pause

−

Double Press MultiFunction button (1): Next Track

−

Triple Press MultiFunction button (1): Previous Track

−

Press and hold MultiFunction button (1) 1 sec: Siri/Google Assistant (Voice Dial)

Bluetooth Pairing

Turn on the Bluetooth function on your mobile phone. Search “Apache” and pair.

Phone:

−

Single Press MultiFunction button (1): Answer/End Call

−

Press and hold the MultiFunction button (1): Reject Call

−

If two mobiles are connected, the first phone rings, the phones send the own call signal to the headset, single press

MultiFunction button (1) to answer the call. While talking with the first caller, the second phone rings (no tones are

heard in the headset), you can switch to the second call and put the first call on hold by pressing Multi-Function

button (1). Press MultiFunction button (1) to toggle between the first and second callers.

Pair with two mobile phones

−

Pair the first mobile then disconnect the Bluetooth connection with your mobile. Start pairing the second mobile,

after paired, activate the first mobile Bluetooth pairing function, the first mobile will automatically establish

connection with the headset.

−

When the first phone rings, the phones send the call signal to the headset, single press Multi-Functional button (1)

Summary of content (5 pages)

PAGE 1
MODEL NUMBER: HH-250BHP LEVEL DEPENDENT HEADSET WITH BLUETOOTH Locations of Controls 1. 2. 3. 4. 5. 6. 7. 8. 9. MultiFunction Button Bluetooth Volume Up Bluetooth Volume Down Hunting Volume Up Hunting Volume Down Bluetooth Mic Battery Cover USB Micro Charging Port Charge Indicator Battery Installation Either 3 x AAA sized battery or Tailor Made Lithium Battery can be used. 1. Lithium Battery: Ensure that the On/Oﬀ Knob is switched oﬀ. Open the Battery Cover.
PAGE 2
− to answer the call. While talking with the first caller, the second phone rings (no tones are heard in the headset), press the Multi-Functional button (1) to switch to the second call and put the first call on hold. Press MultiFunctional button (1) to toggle between the first and second callers. Allow stream music from one mobile phone only if two devices are paired. Bluetooth Volume: − To adjust the sound level of Bluetooth, Adjusting the volume by pressing button (2) or (3).
PAGE 3
Safety This earmuffs is intended to protect your ears against hazard noise. Loud music can cause hearing damage. Avoid working in a noisy environment over extended periods of time. Wear the hearing protection when working at a noisy workplace. Acoustical warning, indication signals and environmental noises can sound different when wearing hearing protection. The perception of warning signals in certain workplaces may be affected when using a sound reproducing system.
PAGE 4
Mf (dB) Sf (dB) APV (dB) SNR = dB H-value = dB M-value = dB L-value = dB Bluetooth SPL: HSP: A2DP: Level Dependence Criterion Level H = dB, M = dB, L = dB Guarantee If the product fails, please contact your supplier. Remember that many outlets will require that you have a valid proof of purchase. Any defect that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit.
PAGE 5
FCC Part 15 Compliance Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.