MSDS

MATERIAL SAFETY DATA SHEET
Section V—Reactivity Data
Stability
Unstable
Conditions to Avoid
Avoid exposure to heat and open flame. Do not
puncture, crush or incinerate.
Stable
YES
Incompatibility (Materials to Avoid)
None (during normal operation). Avoid exposure to heat, open flame, and corrosives.
Hazardous Decomposition or Byproducts
None (during normal operating conditions). If cells are opened, hydrogen fluoride and
carbon monoxide may be released.
Hazardous
Polymerization
May Occur
YES
Conditions to Avoid
Avoid exposure to heat and open flame. Do not
puncture, crush or incinerate
Will Not Occur
Section VI—Health Hazard Data
Route(s) of Entry
Inhalation?
YES
Skin?
YES
Ingestion?
YES
Health Hazards (Acute and Chronic)
It can cause serious chemical burns of mouth, esophagus, and gastrointestinal tract.
It
can cause respiratory irritation,localized inflammation.
It can cause skin irritation and chemical burns.
Carcinogenicity
NTP?
NO
IARC Monographs?
YES
OSHA Regulated?
NO
Signs and Symptoms of Exposure
Serious chemical burns of mouth,esophagus, gastrointestinal tract, respiratory irritation, skin irritation and localized
inflammation.
Medical Conditions
Generally Aggravated by Exposure
Serious chemical burns of mouth,esophagus, gastrointestinal tract, respiratory irritation, skin irritation and localized
inflammation.
Emergency and First Aid Procedures
1.Seek medical attention immediately; 2. provide fresh air and seek medical attention;
Section VII—Precautions for Safe Handling and Use
Steps to Be Taken in Case Material Is Released or Spilled
1.Engineering control: keep away from heat and open flame.stored in a cool dry place.
2.Personal protection:
Respiratory production, Eye/Face protection, Gloves and foot protection.
Waste Disposal Method
1. On hand: Place material into suitable containers and call local fire/police department.
2. In water: If possible, remove from water and call local fire/police department.
Precautions to Be Taken in Handling and Storing
1. Handling: Do not expose the battery to excessive physical shock or vibration.
2. Storage: Stored in a cool,dry,and well ventilated area.
Other Precautions
Enginerring
control and personal protection.
Section VIII —Control Measures
Respiratory Protection (Specify Type)