Instructions / Assembly

7. Set and trip cage several times to be sure the
cage is working properly. Trip trap using a pen or
pencil, sticking an end through the side of the cage
and pushing down on the bait pan.
Adjusting Trigger Rods
For all models, if a door is not level when the cage
is set, hold the door open and level with one hand,
and bend the trigger rod up
with the other hand.
Correcting Over-Adjustment to Trigger Rods
On the 1025, 1030, and 1040, tension on the
trigger rods should be only from door springs. To
correct an over adjustment to the tension, hold the
door open and level, and bend the trigger rod
down.
Releasing the Animal
To release the animal, flip the door locks into the
unlocked position (illustration # 1). Gently flip the
trap on to it's side or upside down. One suggestion
would be to use your foot. Back away from the
trap. The animal will walk away on it's own.
Illustration 4
Illustration 5