Installation Guide

ManualsBrandsHavahart Wireless ManualsOutdoorsRadial-Shape Select Wireless Dog Fence for Medium-Large Dogs

2 3

Training Your Dog

PRELIMINARY PHASE -- Flag AwarenessTraining - Optional (2-3 training sessions per day: each 10-15 minutes long)

Completing this phase will add 3 days to your training, but will give your dog more time to get used to the

Training Flags if you choose to complete it.

1. Turn OFF the fence (see page 16)

2. Fit the Havahart

Collar around your dog’s neck. Place a different

non-metal collar above the Havahart

Collar and attach a leash to it.

Make sure that this collar does not apply pressure to the Probes on

the Havahart

Collar as this could hurt your dog when you pull on

the leash.

3. Using the leash, walk your dog around inside the Roaming Area for

5 minutes, avoiding contact with the Trigger Zone.

4. Approach one of the Training Flags with your dog. When your dog gets close to the flag, gently shake the

flag while saying “Bad Flags” in a firm, disapproving tone. Do not yell or frighten your dog.

5. Lead your dog back into the Roaming Area and praise your dog.

6. Repeat this process at several different Training Flags.

7. End with lots of playtime and praise for your dog in the Roaming Area at least 10 feet away from the

Training Flags.

8. Be sure to remove the Havahart

Collar from your dog after each training session.

NOTE: You may proceed to PHASE 1 when your dog avoids going near the Training Flags

but will walk anywhere within the Roaming Area.

PHASE 1 -- Passive Training -- DAY 1-3 (2-3 training sessions per day: each 10-15 minutes long)

1. Turn ON the fence (see Page 16) and set the correction level to Tone Only (see Page 13).

2. To ensure that the system is working properly, take the Havahart

Collar by itself out to the Trigger Zone and listen for the tone.

3. Fit the Havahart

Collar around your dog’s neck. Place a different

non-metal collar above the Havahart

Collar and attach a leash to it.

Make sure that this collar does not apply pressure to the Probes on

the Havahart

Collar as this could hurt your dog when you pull on

the leash.

4. Using the leash, walk your dog around inside the Roaming Area for

5 minutes, avoiding contact with the Trigger Zone.

5. Calmly approach the Trigger Zone flag line -- do not look at your dog.

6. Give your dog the opportunity to pass into the Trigger Zone. He will hear a tone within the Trigger Zone.

7. Allow your dog to stay in the Trigger Zone for a few seconds while hearing the tone.

8. Gently shake a Training Flag while saying “Bad Flags” in a firm, disapproving tone to show your dog

that the flags are associated with the tone coming from the Havahart

Collar. Do not yell or

frighten your dog.

9. Lead your dog back into the Roaming Area and praise your dog.

10. Repeat this process at several different Training Flags.

11. As training progresses over the next 2 days, you should notice that when your dog hears the tone, he

will return to the Roaming Area without your prompting.

12. End with lots of playtime and praise for your dog in the Roaming Area at least 10 feet away from

the Training Flags.

13. Be sure to remove the Havahart

Collar from your dog after each training session.

NOTE: You may proceed to PHASE 2 when your dog avoids going near the Training Flags

when you approach and actually turns to go back to the Roaming Area without your aid.

Havahart

Radial-Shape Wireless Dog Fence

www.HavahartWireless.com

Havahart

Radial-Shape Wireless Dog Fence

1-800-800-1819, Option 1