Installation Guide
19 1
Important Collar Safety Guidelines:
1. During training, do not let your dog wear the Collar
without direct supervision.
2. Each time you take the Collar off your dog, look for any
indication of a sore or rash.
3. Should you find any indication of a sore or rash on your
dog, stop using the Collar for a few days.
4. If the rash or sore exists for more than 2 days, consult
your veterinarian.
5. Wash your dog’s neck weekly with mild soap and a
wash cloth and then rinse clean.
5. Wash the Probes of the Collar weekly with mild soap
and a wash cloth and then rinse clean.
Installing the Radial-Shape Wireless Dog Fence
Fitting a Collar
If you do not remove the Collar from
your dog’s neck at least every 12 hours
AND clean your dog’s neck and the
Collar, Pressure Necrosis may occur
which is a deterioration of your dog’s
skin. It is caused by extended contact to
the pressure of the Probes of the Collar
combined with the oil and dirt that may
accumulate on the Probes if not
kept clean.
Havahart
®
Radial-Shape Wireless Dog Fence
www.HavahartWireless.com
WARNING
!
Training Your Dog
Training Your Dog
IMPORTANT REMINDERS:
Please read the following information completely before you
begin training:
• Proper training of your dog is essential to help ensure the
successful operation of your Radial-Shape Wireless Dog Fence.
• We recommend that you train your dog for a minimum of 15
consecutive days. Use a calendar to track your dog’s progress.
• Keep your training sessions short and frequent -- approximately 10-15 minutes long, 2-3 times a day.
• Every dog is unique and may respond differently to the training depending on its age, size,
temperament and ability to learn. For this reason, you may need to adjust your training schedule accordingly.
• It may be necessary to decrease the speed of the training schedule or add more training days if your dog seems
to be under stress. Signs that your dog may be under stress include: tail between legs, ears pulled back,
refusal to go outside the home and nervous shaking.
• Before beginning Collar-assisted training, allow your dog to get used to wearing the Havahart
®
Collar with
the battery removed.
• Have fun with your dog during the training process and end each session with positive praise and play
time in the Roaming Area at least 10 feet away from the Training Flags.
• Be patient and consistent in your approach.
• Remove the Havahart
®
Collar after each training session.
• If you need to take your dog out of the Roaming Area during training, remove the Havahart
®
Collar and
use one of the following methods:
1. Walk your dog outside of the Roaming Area while on a leash. Cross the same area of the Trigger Zone
flag line each time, giving a command such as “CROSS”, and praising your dog for crossing this specific area.
Always leave this area with your dog on a leash.
2. Carry your dog out.
3. Take your dog out in a car.
• If you are training more than one dog, train each dog separately.
• Should your dog breach the Trigger Zone while wearing the Havahart
®
Collar, unlike an underground wire fence,
your dog will not receive a separate correction for returning through the Trigger Zone back into the Roaming Area.
• It is important that you complete the entire training process and do not skip any phases.
The Radial-Shape Wireless Dog Fence
from Havahart
®
is not a physical boundary.
It is necessary to contain your dog using a
leash or other means during training.
!
IMPORTANT MESSAGE
Havahart
®
Radial-Shape Wireless Dog Fence
1-800-800-1819, Option 1