Use and Care Manual

1. Attach fog hose from underneath the cape to the FOG BRACKET. Your fog hose will click and secure in place over the
raised surface rings of the FOG BRACKET. (see Illustration A)
Depress the lever arms of the FOG BRACKET and attach to the fog machine nozzle. (see Illustration B)
2. Plug the FOG CORD into your fog machine. If the fog cord plug does not fit, see illustration 2A.
2A. Plug the FOG CORD into the FOG CORD ADAPTER. Plug the FOG CORD ADAPTER into your fog machine.
3. Plug the other end of the FOG CORD into jack labeled O on the CONTROL BOX. (Match O to O). Make sure your fog
machine is heated up properly, turn your fog machine ON, and then turn the Soul Sucker’s switch to the “ON” position.
Make a loud sound (clap) or move in front of the left shoulder. If no fog appears, press the relay switch on the Waist Bracket
and Module.