Use and Care Manual

4. Lower the HEAD AND CAPE onto the WAIST BRACKET AND MODULE. (Match G to G)
5. Reach inside the sleeve on the CAPE and insert the RIGHT ARM into the center snap-lock post below the
shoulders. (Match H to H)
6. Reach into the sleeve on the CAPE on the opposite side and insert the LEFT ARM into the center snap-lock
post below the shoulders. (Match I to I)
7. Insert the Snap-lock on the hand of the RIGHT ARM into the shoulder of the GIRL BODY AND FOG
HOSE. (Match J to J)
8. Insert the Snap-lock on the hand of the LEFT ARM into the shoulder of the GIRL BODY AND FOG
HOSE. (Match K to K)
9. Feed the FOG HOSE with wire harness from the GIRL BODY AND FOG HOSE up the right sleeve and
down the inside of the Soul Sucker’s CAPE.
10. Use the two hook and look fasteners located on the RIGHT ARM to secure the FOG HOSE and wire harness. Fasten lower
hook and loop fastener between the two white zip ties. The drain hole will drain excess fog juice. Pull sleeve down over
arm.