User guide

64
Appendix
IND100077-153
BIOS - On-board COM Ports Conguration
Low / High Speed
How to congure COM1 and COM2 speed mode in BIOS. In high speed mode, the Baudrate goes above 115200 bps.
Due to limitation of generic Operating System (OS) Driver, it is required to set 9600 for achieving 128000 in high
speed mode. Before conguring it is assumed the user has the appropriate knowledge on how to enter and navigate
within BIOS and change values.
1: From rst BIOS menu navigate to "Advanced / NCT6102D Super IO Conguration" and click enter:
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
PCI Subsystem Settings
ACPI Settings
CPU Conguration
SATA Conguration
PCH-FW Conguration
AMT Conguration
USB Conguration
NCT6102D Super IO Conguration
NCT6102D HW Monitor
Preheat Function Conguration
Option Rom Policy
Intel RC Drivers Version Detail
Advanced
System Super IO Chip
Parameters
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optmized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Main Chipset Boot Security Save & Exit
2: Then navigate to "Serial Port 1 Conguration" or "Serial Port 2 Conguration" and click enter:
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
NCT6102D Super IO Conguration
NCT6102D Super IO Chip NCT6102D
Serial Port 1 Conguration
Serial Port 2 Conguration
WatchDog Count Mode [Second]
WatchDog Timeout Value 0
COM2 Mode [Full duplex master...]
COM Auto RTS
GPIO Group Control [Disabled]
Advanced
Set Parameters of Serial Port 1
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optmized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.