User guide

IND100210-18

General Installation Recommendations

Installation

PCI / PCIe Card removal / replacement - Half Lenght & Full Height

Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL

cables from the computer unit before proceeding!

1: Place the PCI / PCIe Half Length bracket as shown

and push/slide it in so it reaches the end of the card

and click in place at the end of the card.

2: Mount 2 screws on top to fasten the PCI / PCIe Half

Length bracket securely. Use a Pozidriv #2 screwdriver.

PCI / PCIe Card removal / replacement - Half Lenght & Half Height

Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL

cables from the computer unit before proceeding!

1: Place the PCI / PCIe Half Length/Half Height bracket

as shown and fasten it with 2 screws on the top. Use a

Pozidriv #2 screwdriver.

2: Notice the screw at the end of the bracket. By turning

this clockwise using your ngers the support piece will be

pulled downwards and towards the edge of the card, thus

making it secured. Use a fair amount of force.