Manual

DOC101356-1_ - rev 2 – 2013-09-24 - Created by:6644
Page 5 of 24
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: [phone] - [e-mail] - www.hatteland-display.com
HD CAN Module Programmer’s Guide (Linux)
All intellectual properties belongs to Hatteland Display AS
2. Usage of CAN Library
2.1 Installation
2.1.1 Installation Instruction for Binary DEB packages
DEB packages should be installed on Ubuntu systems. API installation package consists from
three binary packages:
hdj2534 (basic package that contains hdj2534.so library and header files for development),
hdj2534-swdl (basic package that contains Software Download application),
hdj2534-apps (additional package that contains testApp utility).
Before installation older packages have to be removed. In order to do this following
commands should be executed:
sudo dpkg -r hdj2534-swdl
sudo dpkg -r hdj2534-apps
sudo dpkg -r hdj2534
In order to install new hdj2534 packages following general command should be used:
sudo dpkg -i package_name_version_platform.deb
Package_name should be replaced with proper package name (e.g. hdj2534, hdj2534-apps or
hdj2354-swdl). Version should be replaced with proper package version (e.g. 1.0.207-9).
Platform should be replaced with proper platform name (e.g. i386).
2.1.2 Installation Instruction for Binary RPM packages
RPM packages should be installed on Fedora and openSUSE systems. API installation package
consists from three binary packages:
hdj2534 (basic package that contains hdj2534.so library and header files for development),
hdj2534-swdl (basic package that contains Software Download application),
hdj2534-apps (additional package that contains testApp utility).
Before installation older packages have to be removed. In order to do this following
commands should be executed:
sudo rpm -e hdj2534-swdl
sudo rpm -e hdj2534-apps
sudo rpm -e hdj2534
In order to install new hdj2534 packages following general command should be used:
sudo rpm -i package_name-version-platform.rpm
Package_name should be replaced with proper package name (e.g. hdj2534, hdj2534-apps or
hdj2354-swdl). Version should be replaced with proper package version (e.g. 1.0.207-13).
Platform should be replaced with proper platform name (e.g. i586).
2.2 Link
The Library for HD CAN module is provided in the form of dynamic library under Linux. After the
programmer follows the installation instruction as above, the file should be correctly linked into the
developing project.
If the developing project is including makefile, the “-lhdj2534” command should be added.
If it is under Eclipse, the setting as the screenshot below should be performed.