USER MANUAL Compact Fanless Computer HT B22Gx STC-yzz-Mzzz where “x” is CPU type, “y” = Operating System (OS) type, “z” = hardware configuration dependent User Manual Updated: 04 Jun 2015 Doc Id: INB100610-2 (Rev 8) Created: 363 Approved: 6987 Please visit www.hatteland-display.com for the latest electronic version of this manual. Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.
Copyright © 2015 Hatteland Display AS Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Display AS. Review also: www.hatteland-display.com/pdf/misc/doc100703-1_permission_to_create_user_manuals.
Contents Contents..................................................................................... 3 Contents of package....................................................................................5 General....................................................................................... 7 About this manual.........................................................................................8 About Hatteland Display.........................................................................
Contents Technical Drawings................................................................. 35 Technical Drawings - HT B22Gx STC-yzz-Mzzz........................................36 Technical Drawings - Accessories......................................... 37 Technical Drawings - Mounting Bracket Kit - HT B22.................................38 HT 00270 OPT-A1.................................................................................. 38 Technical Drawings - Mounting Plate/Cable Tension Relievers.......
Contents of package Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list. Item Description Illustration 1 pcs of power cable European Type F “Schuko” to IEC. Length 1.8m EUR TYPE F 1 pcs of power cable US Type B plug to IEC. Length 1.8m US TYPE B IEC FS-CABLE EU IEC 80099 Documentation and Driver DVD for factory installed components like mainboard, IDE, network etc. For most recent drivers, please visit “www.hatteland-display.
This page left intentionally blank 6
General 7
Hatteland Display AS About this manual The manual contains electrical, mechanical and input/output signal specifications. All specifications in this manual, due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last update and revision of this manual are shown both on the frontpage and also in the “Revision History” chapter at the end of the manual.
Computers Computers introduction Hatteland Display’s range of type-approved computers is designed to perform in harsh environments while providing the performance and flexibility you expect. We offer rack mount and black box/standalone computer solutions for every need. Our computers are used by system integrators, boat builders and endusers and can be found on all vessel types, all over the world.
Product Labelling Serial Number Label Placement (external) Rear Side of unit Quality Control (QC) OS S/N Serial Number Computers - Typenumber Overview Serial Number Label Layout IND100780-6 - Rev 03 - 02 Jul This document explains the type number structure for the Hatteland Display Compact, Rackmount and Compact Product Type Fanless product range manufactured after 2012. Example “HT B22”, “HT C02” and “HT 221”.
Installation 11
General Installation Recommendations Installation and mounting of computers 1. Units may be intended for various methods of installation or mounting (rack mounting, panel mounting, bracket mounting, ceiling/wall mounting); for details, please see the relevant mechanical drawings. 2. Adequate ventilation is a necessary prerequisite for the life of the unit. The air inlet and outlet openings must definitely be kept clear; coverings which restrict ventilation are not permissible.
General Installation Recommendations Housing / Terminal Block Connector Overview Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-pin, 5-pin) which plugs into the connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal block connectors have steering rails, which ensures that it can not be mounted wrong. The color of these connectors may vary between black, green and orange depending on manufacturer.
General Installation Recommendations If your installation require additional cable fasteners support, please visit and purchase directly from manufacturer: Illustrations below are approximate, actual Housing and Hood may deviate slightly, but function remains the same. Phoenix Cable Housing - Illustration Weidmüller Cover Hood - Illustration Weidmüller 1005290000 - BCZ 3.81 AH04 BK BX (4-pin) Weidmüller 1005300000 - BCZ 3.
General Installation Recommendations Accessible Storage Device (HDD/SSD) removal / replacement HT B22 Note: Areas of interest are marked in this section with symbols in RED color. Although the trays are Hot-Swappable, it is considered to be a good practice to power off the unit and disconnect power cable before proceeding! ▼ 1: Locate which tray you want to remove/replace and press its eject button inwards (FIG1). The hatch will automatically open due to spring lock/unlock design.
General Installation Recommendations Mounting Bracket Kit (Wall / Desktop) HT B22 Mounting Bracket Kit (HT 00270 OPT-A1) is included with delivery. Note: Areas of interest are marked in this section with symbols in RED color. Note: In order to secure the unit properly, please use only the screws delivered with the unit.
General Installation Recommendations Mounting Guidelines and tips Even though the HT B22 is fanless with no cooling apertures in the chassis, the unit will produce a certain amount of heat through the aluminium chassis. The top of the chassis as been designed with heat dissipation groves which allow heat to be properly expelled.
Physical Overview - HT B22Gx STC-yzz-Mzzz Front area of unit Device #0 (Boot/Main) Power LED Activity LED Power LED Activity LED Device #1 (Optional) Power ON/OFF Reset Button Power LED 2 x USB2.0 Power ON/OFF Button: Reset Button (Hard Reset): 2.5” Removable SATA HDD/SSD Trays To turn ON the computer, press down button and release it immediately. The Power LED indication will illuminate blue and the operating system will automatically boot.
Physical Overview - HT B22Gx STC-yzz-Mzzz Connector area of unit DVI-I/RGB Out RS-422/RS-485 (COM2) 1 x USB1.1 3 x USB2.0 2 x RJ45 Network Mic-in, Line-out Power Input DC PS/2 Keyboard In PS/2 Mouse In RGB/VGA Out Power Input AC Expansion area for optional modules RS-232 (COM1) 4 x RS-422/RS-485 NMEA / ECDIS For detailed pinout assignments and connector information, please review “Pinout Assignments” and “Housing / Terminal Block Connector Overview” in this manual.
Physical Overview - HT B22Gx STC-yzz-Mzzz COM2 Serial Port INPUT / OUTPUT: 1 x D-SUB 9P Male connector with RS-422/RS-485 support. Fasten the cable to the connector using the provided screws on the cable housing itself. Baud Rate Min: 50b/s, Max: 1497600b/s (1.5Mb/s), Non-isolated port. Enhanced internal ESD Specifications: +/-15kV Human Body Model, +/-15kV IEC1000-4-2 Air Discharge, +/-8kV I EC 1 000-4-2 Contact Discharge.
Physical Overview - HT B22Gx STC-yzz-Mzzz NMEA RS-422 / RS-485 (ECDIS) module (PCA100293-1): Suitable for communication with serial protocol based equipment. Connect and secure your cables to the Terminal Block 3.81 connector. For more information please review the Data Sheet in the Appendix chapter as well as the “Housing Connector Overview” in this manual. Note: Our units is based on an isolated RS-485 interface with enhancements to meet NMEA standard.
Physical Overview - HT B22Gx STC-yzz-Mzzz Audio INPUT/OUTPUT: All connectors are 3.5” Jack Stereo, non-amplified. AC’97 audio support. 5.1 channel. HD Audio. It can be configured via the operating system to act as 2-channel, 4-channel, 6-channel or 8-channel. Please review 3rd party driver software/manual to configure the channel setup. Note: For additional 2W Amplified output, use Expansion Area Module (HT 00271 OPT-A1).
Physical Overview - HT B22Gx STC-yzz-Mzzz EXPANSION AREA for Optional modules: In this expansion area of the unit, optional factory mounted modules may be available. Connect and secure your cables to the Terminal Blocks or connectors, depending on module installed. The table below lists all modules currently available for factory mounting. For detailed pinout assignments and connector information, please review “Pinout Assignments” and “Housing / Terminal Block Connector Overview” in this manual.
This page left intentionally blank 24
Specifications 25
SPECIFICATIONS Specifications - HT B22Gx STC-yzz-Mzzz Note: All specifications are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. TT EE C CH HN N II C CA A LL D D EE SS C CR R II PP TT II O ON N Computer Specifications: (Standard model) • • • • • • • • • • • • • • • • • • • • • • • • Operating System : Processor : Memory/RAM : Storage : Graphics : Graphics Res.
Specifications - CAN Module with CO-Processor All specifications are subject to change without prior notice! DATA SHEET This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.
Specifications - NMEA / IEC COM Module RS-422 / RS-485 DATA SHEET This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.
Specifications - NMEA / IEC COM Module RS-422 / RS-485 NMEA RS-422 / RS-485 (ECDIS) module (PCA100293-1): Suitable for communication with serial protocol based equipment. Connect and secure your cables to the Terminal Block 3.81 connector. For more information please review the Data Sheet in the Appendix chapter as well as the “Housing Connector Overview” in this manual. Note: Our units is based on an isolated RS-485 interface with enhancements to meet NMEA standard.
Specifications - Isolated Digital Input/Output Module All specifications are subject to change without prior notice! DATA SHEET This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.
Specifications - Isolated Digital Input/Output Module All specifications are subject to change without prior notice! SPECIFICATIONS Additional • Cable connector • Test and certicate Note: All specifications are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. 4 x Phoenix 1827732 (MC 1,5/ 5-STF-3,81) Terminal Block 3.
Specifications - LAN Module All specifications are subject to change without prior notice! DATA SHEET This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.
Specifications - External Modules (USB) All specifications are subject to change without prior notice! DATA SHEET This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.
Specifications - External Modules (USB) All specifications are subject to change without prior notice! SPECIFICATIONS Note: All specifications are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. Ordering Details: TypeNumber Description Internal Specications (link to separate datasheets) HT 00262 OPT-A1 NMEA COM 4 x NMEA RS-422/RS-485 isolated Via 5-pin Terminal Block 3.
Technical Drawings 35
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
Technical Drawings - Accessories 37
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This page left intentionally blank 42
Appendixes 43
SSD Selection Guide Solid State Disk (SSD) Devices Last revised : 4 November 2014 SSD's has many benefits over conventional hard drives, but when it comes to write endurance it is important to choose the technology to be used with care. It is of very high importance to consider several aspects when using an SSD for a particular application, below the most critical ones, such as: - Nature of the application, data written to disk during a defined time period (worst case).
SSD Selection Guide Calculation of required size of SSD (Multi-Level Cell - MLC) device) The table below details the write endurance of the an enterprise environment. All values are verified by Hatteland Display during the qualification / selection process. Write Endurance Specifications Intel® SSD 320 Series Write Endurance Specifications Current 2.
SSD Selection Guide Example (based on Intel® SSD 320 Series) A general assessment based on requirements to determine the most suitable SSD device. When these factors are known or specified in detail, we can calculate and conclude which SSD device is most suitable (see bottom of page). Question Client Answer We need to know how much data is written to disk Chart Data : 2GB /Week (worst case) during a known time period (per second, Log/User Data: : 10kB /Sec minute, hour etc.
SSD Selection Guide Preparation 1: Install "Intel® Solid-Sate Drive Toolbox" at target system. 2: Install the unit in valid configuration, i.e. the application shall running valid use case, if possible use worst case scenario (with respect to disk activity). 3: Before start of measurement, check and store actual SMART data. - Start "Intel® Solid-Sate Drive toolbol". - Refresh (button at home screen). - Export SMART data, store current data at file (button at home screen).
Pinout Assignments Connectors illustrated here are either standard by factory default or may be available (through factory customization). Note that some combinations may not be possible due to space restrictions. List also valid for customized models. All pin out assignments are seen from users Point of View (POV) while looking straight at the connector. Please review the dedicated datasheet or technical drawings for your actual unit to identify and determine the presence of desired connector.
Pinout Assignments Serial COM RS-485/RS-422, 9-pin DSUB Male “Half Duplex Mode* Serial COM RS-485/RS-422, 9-pin DSUB Male “Full Duplex Mode* 1 2 3 4 5 1 2 3 4 5 6 7 PIN 01 PIN 02 PIN 03 PIN 04 PIN 05 PIN 06 PIN 07 PIN 08 PIN 09 Res. Res. Data+ DataGND N/C N/C N/C N/C 8 9 6 7 Reserved, do not connect Reserved, do not connect Data Positive Data Negative Signal Ground No internal connection No internal connection No internal connection No internal connection *ECHO not supported.
Pinout Assignments 4+4 pin CAN I/O Module, 2 channels Type Number “HT 00254 OPT-A1” 10+10 pin Isolated Digital Input/Output Module Type Number “HT00268 OPT-A1” Module A X8 CAN1 1 2 3 4 1 2 3 4 Module B X9 CAN2 Pin 01 Pin 02 Pin 03 Pin 04 X8 - Can1: 081 X8 - Can1: 082 X8 - Can1: 083 X8 - Can1: 084 In Low Out Low In High Out High Pin 01 Pin 02 Pin 03 Pin 04 X9 - Can2: 091 X9 - Can2: 092 X9 - Can2: 093 X9 - Can2: 094 In Low Out Low In High Out High Module A A1 A2 B1 B2 O1 C1 C2 D1 D2 O2 Modu
Pinout Assignments 9-pin Amplified Mono/Stereo Audio Out, DSUB Female Module Type Number “HT 00271 OPT-A1” 5 4 3 2 1 9 8 7 6 PIN 01 PIN 02 PIN 03 PIN 04 PIN 05 PIN 06 PIN 07 PIN 08 PIN 09 LAUDR LAUD RAUDR RAUD N/C N/C N/C N/C N/C Left Audio Return* Left Audio* Right Audio Return Right Audio No internal connection No internal connection No internal connection No internal connection No internal connection *For Mono: connect pin 01 and 02 only Appendix IND100241-21 51
Trouble-shooting GENERAL TROUBLE-SHOOTING CD-ROM FAILURE OR READ/DETECTION PROBLEMS? If the product are operated/located in a area with extreme condensation, the CD/DVD-ROM drive may not work correctly due to condensation on the read head. Keep the product on for a while until it’s reached normal operating temperature, and retry accessing discs. Otherwise, consider using USB memory sticks or alternative storage devices.
Declaration of Conformity We, manufacturer, Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD, HM MIL, HM CMD, HT STD, HD MMD, HM MMD, HT MMC, HD MMC and HT/HM (computers) product ranges is in conformity with the following standards in accordance with the EMC Directive.
Return Of Goods Information Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned.
General Terms and Conditions As of January 2015, Hatteland Display AS’ “Terms of Sales and Delivery” and “Warranty Terms” has been substituted by the updated ”General terms and conditions for sale of goods and performance of additional services” (the “General Terms and Conditions”).
API / VCOM Commands Introduction VCOM = Internal Virtual COM x (VCOM), where x is OS/configuration dependent. Normally COM7, but could vary. API = Application programming interface. Standard industry term for how software components should interact. Installing API / VCOM Drivers In order to access and communicate with the HT B22 computer unit, it may or may not already have pre-installed drivers depending on factory defaults.
API / VCOM Commands Message Format The basic message format shall be as follows and sent to the Internal Virtual COM (VCOM) port: Byte # 0 1 2 3 4 5 6 7..etc End Byte ATTN ADDR CMD CMD CMD LEN IHCHK DATA IDCHK The minimum message size is 7 bytes (0x07). The maximum message size is 82 bytes (0x52), consistent with the EN61162-1 standard.
API / VCOM Commands Available Messages to Send: Please review the last page of this section for a code example. “SWI” - Retrieve Internal Software Version Query: This query is sent to the unit in order to get the version. Any future revisions, such as CMD additions or changes to the software will increment the software version. The unit will reply to this command with an ACK attention code. The DATA field will be a ASCII text string indicating the software version, e.g: “SW101010-0180”.
API / VCOM Commands Basic Example for setting Half/Full Duplex Mode Example using Microsoft® Visual Studio 2012, C# style. Note, COM7 has been used as port ID. It may differ depending on your system installation. In any case, simply write COMx (where x is the number defined by the Operating System automatically) for Virtual COM Port. using System.IO.
API / VCOM Commands Basic Example for setting Half/Full Duplex Mode Example using Linux, C style. Note, ttyS7 has been used as port ID. It may differ depending on your system installation. In any case, simply write ttySx (where x is the number defined by the Operating System automatically) for Virtual COM Port. #include #include #include #include #include #include
Signal Detection Note Overview of known behaviours regarding signal outputs Table data and tests last revised 18 April 2013 Due to the design and nature of third-party graphics driver and industrial manufacturers on-board chip architecture there are certain issues regarding signal auto detection / connecting / re-connecting / disconnecting signal cables from DVI-I and RGB/VGA connectors on a Stand-Alone computer unit.
Signal Detection Note Microsoft® Windows® XP Professional SP3, 32bit with latest graphics/motherboard drivers from MEDIA STD DVD or our website.
Notes General Notes: - License Terms for the installed OEM Operating System (OS) can be found in the following default factory paths: Note: This is a general listing for a varity of OS’s Hatteland Display can factory install depending on unit. Please check specification for your unit to verify type of OS installed in order to retrieve the license terms. Microsoft® Windows® 7 Professional: C:\Windows\System32\en-US\Licenses\_Default\Professional\license.
User Notes Appendix IND100077-24 64
Revision History Rev. By Date Notes 00_1 JE SE 18 Mar 2013 Internal review release. Preliminary version 00_2 JE BU MM AK MJL SE 10 Apr 2013 Revised after internal review. Preliminary version 00_3 BEJ JE MM 19 Apr 2013 Revised after internal review. Preliminary version 04_4 JE MM SE 10 May 2013 Revised after internal review. Preliminary version 01 JE SE 02 Jul 2013 Revised and created release version for internet/dvd.
w ww.hat tel and-di sp l ay .
