USER MANUAL Compact Fanless Computers HT B17 xxy-zzzz HT B18 xxy-zzzz xx=standard or customized y=operating system zzzz=configuration dependent User Manual HT B17 / HT B18 Updated: 03 Jun 2015 Doc Id: INB100032-5 (Rev 20) Created: 363 Approved: 6987 Please visit www.hatteland-display.com for the latest electronic version of this manual. Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.
Copyright © 2015 Hatteland Display AS Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Display AS. Review also: www.hatteland-display.com/pdf/misc/doc100703-1_permission_to_create_user_manuals.
Contents Contents..................................................................................... 3 Contents of package...........................................................................5 General....................................................................................... 7 About this manual................................................................................8 About Hatteland Display......................................................................8 www.
Contents Technical Drawings................................................................. 31 Technical Drawings - HT B17............................................................ 32 Technical Drawings - HT B18............................................................ 33 - HWCode00.................................................................................33 - HWCode90.................................................................................34 Technical Drawings - Accessories.............
Contents of package This product is shipped with: Item Description Illustration 1 pcs of power cable European Type F “Schuko” to IEC. Length 1.8m EUR TYPE F 1 pcs of power cable US Type B plug to IEC. Length 1.8m US TYPE B IEC FS-CABLE EU IEC 80099 1 pcs of DC Power Input housing with internal cable screw terminal. FCE17-E2W2SS-2N0 & L17DPPK09JSU (cover) Documentation and Driver DVD for factory installed components like mainboard, IDE, network etc. For most recent drivers, please visit “www.
This page left intentionally blank 6
General 7
Hatteland Display AS About this manual The manual contains electrical, mechanical and input/output signal specifications. All specifications in this manual, due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last update and revision of this manual are shown both on the frontpage and also in the “Revision History” chapter at the end of the manual.
Computers Computers introduction Hatteland Display’s range of type-approved computers is designed to perform in harsh environments while providing the performance and flexibility you expect. We offer rack mount and black box/standalone computer solutions for every need. Our computers are used by system integrators, boat builders and endusers and can be found on all vessel types, all over the world.
Basic Construction - HT B17 Basic Construction Compact Fanless Computer Chassis with cooling design Power Module Front plate with Serial Number Label Chassis Support Mechanics Connector plates Heat Pipe Cooling Mainboard and CPU I/O Connectors SSD/HDD and Casing Bottom chassis plate Standard model, customized versions may vary General IND100077-102 10
Basic Construction - HT B18 Basic Construction Compact Fanless Computer Chassis with cooling design Power Module Front plate with Serial Number Label Replaceable SSD/HDD and casing Connector plates Chassis Support Mechanics I/O Connectors Heat Pipe Cooling Mainboard and CPU Memory PCI Card & Slots Bottom chassis plate Power Inputs Standard model, customized versions may vary General IND100077-99 11
Product Labels (Examples) Serial Number Label Placement (external) HT B17 HT B18 Serial Number Label Layout Product Type Manufacturer & Country Input Voltages & Power Rating Manufactured Date yyyymmdd Barcode (TYP+SNO) Product Hardware Revision Label Size: 6cm x 2cm Serial Number Label Nomenclature XX XYY XXX-XYYY-YYYYYY HT B18 STD-A100-000001 || ||| ||| |||| |||||| || ||| ||| |||| ¤¤¤¤¤¤|| ||| ||| |¤¤¤-------|| ||| ||| ¤----------|| ||| ||¤-----------|| ||| ¤¤-------------|| |¤¤----------------|| ¤
Installation 13
General Installation Recommendations Installation and mounting of computers 1. Units may be intended for various methods of installation or mounting (rack mounting, panel mounting, bracket mounting, ceiling/wall mounting); for details, please see the relevant mechanical drawings. 2. Adequate ventilation is a necessary prerequisite for the life of the unit. The air inlet and outlet openings must definitely be kept clear; coverings which restrict ventilation are not permissible.
General Installation Recommendations Cables Use only high quality shielded signal cables. For RGB/DVI cables use only cables with separate coax for Red, Green and Blue. Configuring DC power input housing connector Note: Only applicable for certain models! For installations that require DC power input, use the provided 2-pin DC Power Input housing with internal cable screw terminal.
General Installation Recommendations Accessible SSD (Hard Drive HDD) removal / replacement HT B18 Note: Areas of interest are marked in this section with symbols in RED color. Please power off and disconnect ALL cables from the computer unit before proceeding! ▼ 1: Unscrew 1 pcs of knob screw anti-clockwise as indicated with your fingers. ▼ 2: Lift the bracket upwards as indicated. ▼ 3: Pull out the SSD and its casing as indicated.
General Installation Recommendations Internal PCI Cards / Brackets dismounting and mounting HT B18 Note: Areas of interest are marked in this section with symbols in RED color. Please power off and disconnect ALL cables from the computer unit before proceeding! ▼ 1: Unscrew the bottom cover plate (10 pcs of M3x6mm Torx countersunk screws and lift the cover up.
General Installation Recommendations Internal SSD (Hard Drive HDD) removal / replacement HT B1x Note: Areas of interest are marked in this section with symbols in RED color. Please power off and disconnect ALL cables from the computer unit before proceeding! HT B17 used as illustration in this procedure, but it is valid for both HT B17 and HT B18 computers. ▼ 1: Unscrew the bottom cover plate (10 pcs of M3x6mm Torx countersunk screws and lift the cover up.
Physical Overview - HT B17 Front area of computer Reset Button, Power LED & Button Power LED & Button: Reset Button: (Hard Reset) 2.5” internal S-ATA SSD Hard Drive To turn ON the computer, press down button and release it immediately. The Power LED indication riing will illuminate green and the operating system will automatically boot. To turn OFF the computer, press down this button and hold it for 4 seconds.
Physical Overview - HT B17 Operation/Connection area of computer DC Power Input Network #2 DVI-D OUT (D2) USB 1,2,3,4 RGB/VGA OUT Keyboard Port HDD LED Mouse Port AC Power Input DVI-D OUT (D1) Audio IN/OUT Connectors Network #1 COM1 RS-232 COM1 Serial Port INPUT/OUTPUT: Supports RS-232 using D-SUB 9P Male connectors. Fasten the cable to the connector using the provided screws on the cable housing itself.
Physical Overview - HT B17 Audio INPUT/OUTPUT: All connectors are 3.5” Jack Stereo. AC’97 audio support. 7.1 channel. HD Audio. It can be configured via the operating system to act as 2-channel, 4-channel, 6-channel or 8-channel. Please review 3rd party driver software/ manual to configure the channel setup. Light Pink / Mic In Gray / Center / LFE Out Light Green / Line Out Black / Rear Surround Out Light Blue / Line IN Orange / Side Surround Out USB1,2,3,4 INPUT/OUTPUT: Supports any USB1.
Physical Overview - HT B17 + - DC POWER INPUT: Connect your DC power cable to the 2P Amphenol FCC17 D-SUB Connector (male). Secure the cable to the hex spacers provided on the unit, and secure the other end to your power supply. The internal DC power module supports 24VDC and is part of the Multipower functionality for the unit. GROUNDING SCREW: Please review “General Installation Chapter”, pt. 6 for more information.
Physical Overview - HT B18 Operation/Connection area of computer Reset Button, Power LED & Button Network #2 USB 1,2,3,4 RGB/VGA OUT Replaceable 2.5 SSD COM1 RS-232 Network #1 DVI-D OUT (D2) Hard Drive Keyboard Port Mouse Port COM2 RS-232 RS-422 RS-485 HDD LED DC Power Input AC Power Input DVI-D OUT (D1) Audio IN/OUT Connectors 2 x PCI Slots COM1,2 Serial Port INPUT/OUTPUT: Supports RS-232 or RS-232/RS-422 or RS-485 using D-SUB 9P Male connectors.
Physical Overview - HT B18 2.5” Replaceable internal S-ATA SSD Hard Drive: The B18 unit can use 1 x SSD, 2.5” as the main data storage device. The operating system and all other files will be placed on this, normally visible as drive C: This device is normally factory installed option. The storage device can be easily be upgraded or replaced by loosing the fasten screw and pull the slot out.
Physical Overview - HT B18 USB1,2,3,4 INPUT/OUTPUT: Supports any USB1.1 (12Mbps) or USB2.0 (480Mbps) compliant peripherals. Drivers for most USB devices are usually included in operating system or on separate installation CD’s delivered with Third Party products. USB 1.1 devices will operate in USB 1.1 mode (12 Mbps). PS/2 Mouse and PS/2 Keyboard INPUTS: Connect the PS/2 mouse cable to the PS/2 5P Connector (female) marked with MS.
This page left intentionally blank 26
Specifications 27
Specifications - HT B17 SPECIFICATIONS Note: All specifications are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. TECHNICAL DESCRIPTION Computer Specifications: (Standard model) • • • • • • • • • • • • • • • • • • • • External Connector Type: Installed OS : None for standard version (check Accessories / Options below for OS options) Processor : 1 x Intel® Core™2 Duo Desktop Processor P8400 - 2.
Specifications - HT B18 SPECIFICATIONS Note: All specifications are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. TECHNICAL DESCRIPTION External Connector Type: Computer Specifications: (Standard model) • • • • Processor Memory Graphics Graphics Res.
This page left intentionally blank 30
Technical Drawings 31
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
Compact Fanless Computer IND100132-182 - HWCode00 33 TOP VIEW SIDE VIEW This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must notAS,be used N-5578 in anyNedre wayVats, against Hatteland Display Åmsosen, Norway the interest of Hatteland Display AS. Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information.
Compact Fanless Computer IND100132-182 - HWCode90 34 TOP VIEW SIDE VIEW Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com be shown with or without decimals and indicated mm be [inches]. Tolerance drawings is +/- 1mm. accurate measurements, check relevantAS. DWG file. This document is the property of Hatteland Display AS.
Technical Drawings - Accessories 35
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
Appendixes 43
SSD Selection Guide Solid State Disk (SSD) Devices Last revised : 4 November 2014 SSD's has many benefits over conventional hard drives, but when it comes to write endurance it is important to choose the technology to be used with care. It is of very high importance to consider several aspects when using an SSD for a particular application, below the most critical ones, such as: - Nature of the application, data written to disk during a defined time period (worst case).
SSD Selection Guide Calculation of required size of SSD (Multi-Level Cell - MLC) device) The table below details the write endurance of the an enterprise environment. All values are verified by Hatteland Display during the qualification / selection process. Write Endurance Specifications Intel® SSD 320 Series Write Endurance Specifications Current 2.
SSD Selection Guide Example (based on Intel® SSD 320 Series) A general assessment based on requirements to determine the most suitable SSD device. When these factors are known or specified in detail, we can calculate and conclude which SSD device is most suitable (see bottom of page). Question Client Answer We need to know how much data is written to disk Chart Data : 2GB /Week (worst case) during a known time period (per second, Log/User Data: : 10kB /Sec minute, hour etc.
SSD Selection Guide Preparation 1: Install "Intel® Solid-Sate Drive Toolbox" at target system. 2: Install the unit in valid configuration, i.e. the application shall running valid use case, if possible use worst case scenario (with respect to disk activity). 3: Before start of measurement, check and store actual SMART data. - Start "Intel® Solid-Sate Drive toolbol". - Refresh (button at home screen). - Export SMART data, store current data at file (button at home screen).
Pinout Assignments - Common Connectors Note: Not all connectors may be available on your specific product. This depends on the amount of additional hardware installed from factory, or customized solutions. These pin assignments are for the common connectors used. Connectors are seen from users Point Of View (POV).
Pinout Assignments - Common Connectors 25P Parallel 13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 Pin 01 - STROBE Pin 02 - DATA0 Pin 03 - DATA1 Pin 04 - DATA2 Pin 05 - DATA3 Pin 06 - DATA4 Pin 07 - DATA5 Pin 08 - DATA6 Pin 09 - DATA7 Pin 10 - ACK Pin 11 - BUSY Pin 12 - PE Pin 13 - SELECT Pin 14 - AUTO FEED Pin 15 - ERR# Pin 16 - INIT# Pin 17 - SLIN# Pin 18 - GND Pin 19 - GND Pin 20 - GND Pin 21 - GND Pin 22 - GND Pin 23 - GND Pin 24 - GND Pin 25 - GND This signal indicates to the print
Pin Assignments - Common Connectors (Additional) Pin Assignments - 9P Serial COM RS422 5 Pin Assignments - 9P Serial COM RS485 4 3 2 1 5 9 8 7 6 Pin 01 - N/C Pin 02 - TXPin 03 - RX+ Pin 04 - N/C Pin 05 - GND Pin 06 - N/C Pin 07 - TX+ Pin 08 - RXPin 09 - N/C 4 3 2 1 9 8 7 6 Not Connected Transmit Data Receive Data + Not Connected Ground Not Connected Transmit Data + Receive Data Not Connected Pin 01 - N/C Pin 02 - N/C Pin 03 - DAT+ Pin 04 - N/C Pin 05 - GND Pin 06 - N/C Pin 07 - N/C Pin 08 - DATPin 0
Trouble-shooting GENERAL TROUBLE-SHOOTING CD-ROM FAILURE OR READ/DETECTION PROBLEMS? If the product are operated/located in a area with extreme condensation, the CD/DVD-ROM drive may not work correctly due to condensation on the read head. Keep the product on for a while until it’s reached normal operating temperature, and retry accessing discs. Otherwise, consider using USB memory sticks or alternative storage devices.
Declaration of Conformity We, manufacturer, Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD, HM MIL, HM CMD, HT STD, HD MMD, HM MMD, HT MMC, HD MMC and HT/HM (computers) product ranges is in conformity with the following standards in accordance with the EMC Directive.
Return Of Goods Information Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned.
General Terms and Conditions As of January 2015, Hatteland Display AS’ “Terms of Sales and Delivery” and “Warranty Terms” has been substituted by the updated ”General terms and conditions for sale of goods and performance of additional services” (the “General Terms and Conditions”).
Notes General Notes: - License Terms for the installed OEM Operating System (OS) can be found in the following default factory paths: Note: This is a general listing for a varity of OS’s Hatteland Display can factory install depending on unit. Please check specification for your unit to verify type of OS installed in order to retrieve the license terms. Microsoft® Windows® 7 Professional: C:\Windows\System32\en-US\Licenses\_Default\Professional\license.
User Notes Appendix IND100077-24 56
Revision History Rev. By Date Notes 00_1 JE SE 29 Oct 2009 Internal review release. 01 JE SE 05 Nov 2009 First official release. 02 JE SE 08 Jan 2010 Revised contents of package, added HT 00237 and info about 3rd party hardware (page 4) Added text about ground (GND) in installation chapter (page 18,21).
w ww.hat tel and-di sp l ay .
