User Manual

20
IND100210-2
General Installation Recommendations
Installation
PCI Card removal / replacement - Half Lenght & Full Height
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Place the PCI Half Length bracket as shown and
push/slide it in so it reaches the end of the PCI card.
2: Mount 2 screws on top to fasten the PCI Half Length
bracket. Turn clockwise using a Pozidriv #2 screwdriver.
Repeat the procedure backwards to nalize operation.
PCI Card removal / replacement - Half Lenght & Half Height
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Place the PCI Half Length/Half Height bracket as
shown and fasten it with 2 screws on the top. Turn
clockwise using a Pozidriv #2 screwdriver.
2: Notice the screw at the end of the bracket. By turning
this clockwise using your ngers the support piece will be
pulled downwards and towards the edge of the PCI card,
thus making it secured. Use a fair amount of force.