Manual

35
User Controls
IND100064-19
CALIBRATE RGB GAIN : Color Calibration. Press “+” to automatically adjust it.
DISPLAY ORIENTATION: (Press “+” to access the sub-menu)
Will ip/inverse the display area. Press “+” to choose between:
Normal / Horizontal Inverse / Vertical Inverse / Inverse
LOAD (FACTORY) DEFAULTS: (Press “+” to access the sub-menu).
LOAD USER DEFAULT : Load your own personal custom settings.
SAVE USER DEFAULT : Save your own personal custom settings.
LOAD FACTORY DEFAULT : Will reset the graphic controller settings to the factory preset.
Use caution when using this function, as this will override
your current settings.
SETUP DDC : Reset/optimize image information. This function will setup
correct DDC (Display Data Channel) information. It allows
the display module to send its specications to the display
controller. This information is used by the OSD menu.
TEST PATTERN : Shows a generic test pattern.
RIG FOR BLACK
- Please note that this function may not be available on all HM 20T07 models!
: Makes the display rigged for a black environment.
This means that the function will lower the brightness to
be ranged from 0 to 11fL.
EXIT MENU:
Selecting this function will exit the OSD menu.
Press “+” to exit and save the current settings.
Note:
The OSD settings will also automatically be stored in memory when the OSD exit on user timeout .
OSD Menu Functions
1
2
1
2
1
2
1
2
2
1
2