Owner manual

32
IND100129-152
Specications - HD 08T21 STD-xxx-Fxxx
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
2/2
• 8.0 inch TFT Liquid Crystal Display module
• Widescreen, Aspect Ratio 5:3
• LED Backlight Technology
• TTL Interface
• a-si TFT Active Matrix
• Digital separate synchronization
• Composite synchronization
• Synchronization on green
• Auto detects on chosen source
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronization Range:
• Horizontal : 24 kHz to 81 kHz
• Vertical : 50 Hz to 75 Hz*
* 60Hz is recommended for optimal picture quality
• 236.00 (W) x 166.00 (H) x 51.00 (D) mm
• 9.29" (W) x 6.54" (H) x 2.01" (D)
• 4 x M4 VESA mounting 75x75mm, Max 8mm deep
• Built-in Console mounting 4 x M5x15mm screws
• Weight: TBD kg (approx)
• Operating : Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating : Protection: IP66 front - IP22 rear (EN60529)
Resolutions:
• WVGA : 640 x 480, 720 x 400, 800 x 480*
* Recommended for optimal picture quality
Power Supply:
• 2 x 24VDC : Model HD 08T21 STD-Exx-Fxxx
Dual input, galvanic isolated, automatic switch between power source
Power Consumption:
• Operating : 20W (typ) - 30W (max)
• DVI-I Signal IN : 1 x 29p DVI Female or RGB IN with adapter
• Touchscreen : 1 x USB TYPE B Connector (female)
• DC Power IN : 2 x 2-pin Terminal Block 5.08
Behind front bezel - Glass Display Control™ (GDC) IP66:
• Power On/Off, Brightness Control (-/+), Light Sensor (not visible),
• Programmable Alarm LED, Buzzer (not visible)
• Native Resolution : 800 x 480 (WVGA)
• Pixel Pitch (RGB) : 0.2168 (H) x 0.2168 (V) mm
• Response Time : 5/11ms (typical) (Tr/Tf)
• Contrast Ratio : 600:1 (typical)
• Light Intensity Standard : 600 cd/m
2
(typical)
• Viewable Angle : 70 deg (H) 60 deg (V) (typical)
• Active Display Area : 173.4 (H) x 104.4 (V) mm
• Max Colors : 16.7 million
TFT Technology:
Synchronization:
Physical Considerations:
Environmental Considerations:
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Supported Signals:
Power Specifications:
T E S T I N G / A P P R O V A L S & C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) IACS E10 ClassNK - Nippon Kaiji Kyokai GL - Germanischer Lloyd
DNV - Det Norske Veritas ABS - American Bureau of Shipping BV - Bureau Veritas LRS - Loyd’s Register of Shipping
EU RO MR - Mutual Recognition CCS - China Classification Society
Signal Terminals:
User Controls:
Compass Safe Distance: HD 08T21 STD-xxx-Fxxx Standard: 45cm Steering: 30cm
TFT Characteristics:
• HD 08T21 STD-EA1-FAGP = Dual DC, GDC, Buzzer, PCTouch
• HD 08T21 STD-EA1-FOGP = Dual DC, Optical Bonding Technology, GDC, Buzzer, PCTouch
Available Standard Models:
• Optical Bonding Technology
Factory Mounted Options:
For a full overview of typenumbers, please review the following link:
www.hatteland-display.com/pdflink/ind100780-3.php
• Projected Capacitive Touch Screen (Multitouch, USB interface)
Factory Defaults: