USER MANUAL Series X - Standard Display (STD) Models HD 08T21 STD-xxx-Fxxx - 8.0 inch Standard Display HD 13T21 STD-xxx-Fxxx - 13.3 inch Standard Display User Manual STD Series X Compact Updated: 09 Apr 2015 Doc Id: INB100535-2 (Rev 9) Created: 363 Approved: 6987/6784 Please visit www.hatteland-display.com for the latest electronic version of this manual. Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.
Copyright © 2015 Hatteland Display AS Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Display AS. Review also: www.hatteland-display.com/pdf/misc/doc100703-1_permission_to_create_user_manuals.
Contents Contents........................................................................................... 3 Contents of package.....................................................................................................5 General............................................................................................. 7 About this manual.........................................................................................................8 About Hatteland Display............................
Contents Technical Drawings....................................................................... 35 Technical Drawings - HD 08T21 STD-xxx-Fxxx..........................................................36 Technical Drawings - HD 13T21 STD-xxx-Fxxx..........................................................37 Appendixes.................................................................................... 39 Pinout Assignments.......................................................................................
Contents of package Item Description 1 pcs of Standard DVI Signal Cable. DVI-D 18+1P Male to DVI-D 18+1P Male Single Link - Length 2.0m Illustration HA-SDM-2M 1 pcs of DVI > RGB/VGA adapter DVI 12+5P Male to DSUB 15P Female DVI-4 Documentation and Driver DVD/CD containing the user manual, including the Touch Screen driver for units delivered with a factory mounted touch screen. For most recent drivers, please visit “www.hatteland-display.
This page left intentionally blank 6
General 7
Hatteland Display AS About this manual The manual contains electrical, mechanical and input/output signal specifications. All specifications in this manual, due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last update and revision of this manual are shown both on the frontpage and also in the “Revision History” chapter at the end of the manual.
Compact Displays Series X Standard Display (STD) - Introduction Series X Displays offer the ultimate in performance, convenience, state of the art design and enduring quality for system integrators and boat builders. Series X products offer a range of feature sets optimized for varying requirements and applications.
Product Labeling Introduction This section details the locations, content details and specifications for factory mounted labels for all currently available standard Hatteland Display Standard Industrial Display (STD) models. This information will in most cases also apply for most Customized Models as well, but may differ based on customer requirements, in that case, please refer to the customized User Manual (paper or electronic version, dependent on customer requirements).
Product Labeling Label Locations Number ID and coloring based on “Label Size and Types“ table from previous page. All illustrations below is seen from rear (and side where needed) with connectors facing down. Actual labels regarding its size and text orientation vs product size is drawn in. Due to space restrictions on selected units, some labels will be rotated 90 degrees to fit properly.
Product Labeling Warranty Label If you are to perform service on a unit still under warranty, any warranty will be void if this label show signs of removal attempts (re-gluing) or removed completely. This label is located on the back of the product and covers a key screw. This is to aid service departments to determine if there has been any unauthorized service on a unit still under warranty.
Touch screen products Introduction to products with touch screen Nearly all of our Series X products with touch screen uses Projected Capacitive Touch screen (PCTS), widely used with great success on mobile phones and typical pad devices. PCTS can be equally effective also for marine applications. One of the advantages of PCTS is that it has features seen in both resistive and surface capacitive touch screen technologies.
Touch screen products Touch Screen Drivers and Documentation All units are shipped with a Documentation and Drivers DVD or CD which contains suitable drivers* for touch screens. (Named MEDIA STD01). You can also visit our website www.hatteland-display.com to view the same list (or even recently new added products) for our models with touch screen. Before using the touch screen, it should be calibrated for your system. Please install the 3rd party software* and use the Calibrate function.
Installation 15
General Installation Recommendations First Things First! ATTENTION! To prevent damage to chassis and glass, please review the illustrations below before handling units. CORRECT HANDLING ! WRONG HANDLING ! IND100148-5 - Rev 03 Humidity Exposure Notice! Applies for non-bonded product only.
General Installation Recommendations 7. If the push buttons of the product are not illuminated, an external, dimmable illumination (IEC 60945 Ed. 4, 4.2.2.3, e.g. Goose neck light) is required for navigational use. The illumination shall be dazzle-free and adjustable to extinction. 8. Information about necessary pull-relievers for cables is indicated in the Physical Connection section of this manual. Attention must be paid to this information so that cable breaks will not occur, e.g. during service work. 9.
General Installation Recommendations D: General rule for console mounted units: To ensure proper cooling airflow, long-life and stable operation for all units, please make sure that the console casing have either fans or decent ventilation holes to prevent overheating inside the console due to the combined temperature of both Display or Panel Computer units together with other electronic instruments.
General Installation Recommendations Ergonomics 1. The front surface of the display glass has an anti-reflective (AR) coating which can be scratched and damaged with improper cleaning. It is recommended to use only 90+% pure Isopropyl alcohol (Isopropanol) and a soft fabric cloth for this first cleaning. Fold a cloth into a small pad, dampen the cloth with alcohol, and wipe the glass from one edge to the other in one direction with one continuous motion. The product glass will require cleaning as needed.
General Installation Recommendations Maximum Cable Length Any cable should generally be kept as short as possible to provide a high quality input/output. The maximum signal cable length will depend on the signal resolution and frequency, but also on the quality of the signal output from the computer/radar.
General Installation Recommendations Housing / Terminal Block Connector Overview Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-pin, 5-pin) which plugs into the connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal block connectors have steering rails, which ensures that it can not be mounted wrong. The color of these connectors may vary between black, green and orange depending on manufacturer.
General Installation Recommendations If your installation require additional cable fasteners support, please visit and purchase directly from manufacturer: Illustrations below are approximate, actual Housing and Hood may deviate slightly, but function remains the same. Phoenix Cable Housing - Illustration Weidmüller Cover Hood - Illustration Weidmüller 1005290000 - BCZ 3.81 AH04 BK BX (4-pin) Weidmüller 1005300000 - BCZ 3.
Physical Connections Terminal Label Markings of 8 inch unit 1 2 1 2 Connection area of 8 inch unit DVI-I In Grounding Screw 2 x DC Power Inputs USB Touch 23 IND100133-50
Physical Connections Terminal Label Markings of 13 inch unit 1 2 1 2 Connection area of 13 inch unit DVI-I In USB Touch 24 IND100133-50 Grounding Screw 2 x DC Power Inputs
Physical Connections USB TOUCH: Connect a TYPE B USB Cable between this connector and your PC. Suitable drivers to install and calibrate the touchscreen are available on the separate installation media delivered with the unit. Port is USB2.0 (<5m). DVI-I IN: Connect your DVI cable to the DVI-I 29P Connector (female). The DVI-I connector can function as regular RGB IN by using a DVI-I > RGB/VGA adapter.
This page left intentionally blank 26
Operation 27
User Controls USER CONTROLS OVERVIEW The units are designed by using Glass Display Control™ (GDC) touch technology to allow interactivity adjusting brilliance (brightness) and control power on / off with the use of illuminated symbols. Note that these symbols are only visible (backlight illuminated) when suitable power is connected.
User Controls Power ON/OFF: Touching this symbol will either turn on or off the unit. When unit is on (power cable connected), the symbol is not illuminated until the unit has been turned on once, then symbols will illuminate in white color. When unit is off (power cable still connected) after it was previously turned on, the symbol is illuminated in white color (you can even use the (-) and (+) to adjust the intensity of the illuminated symbols when in this state).
User Controls USER CONTROLS - ADVANCED USAGE The functions described above can also be accessed via the DDC (Display Data Channel) provided over the DVI-I port and through it you can access all frontal symbols (including Light Sensor, Alarm LED, Buzzer) and their functionality to allow extended usage for your 8 and 13 inch Display units - all controlled by your software.
Specifications 31
Specifications - HD 08T21 STD-xxx-Fxxx SPECIFICATIONS Note: All specifications are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. TFT Technology: Physical Considerations: • • • • • • • • • • 8.
Specifications - HD 13T21 STD-xxx-Fxxx SPECIFICATIONS Note: All specifications are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. TFT Technology: Physical Considerations: • • • • • • • • • 13.
This page left intentionally blank 34
Technical Drawings 35
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission. Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm.
This page left intentionally blank 38
Appendixes 39
Pinout Assignments All pin out assignments are seen from users Point of View (POV) while looking straight at the connector. 18/24/24+5 pin DVI-D, DVI-I, Single Link, Dual Link Combined 4 pin USB TYPE B Pin 2: Negative Data Pin 1: VCC +5V Pin 3: Positive Data Pin 4: Ground 9 10 11 12 13 14 15 16 1 pin RCA/BNC COMP.
Basic Trouble-shooting GENERAL ISSUES FOR TFT PANEL BASED PRODUCTS Note: Applies for a range of various products. This is only meant as a general guide. NO PICTURE / LED BEHAVIOUR: If there is no light at all in the LED at the FRONT, check power cables. If the LED in front is green then check if the brightness is set/adjusted to max brightness. Lack of image is most likely to be caused by incorrect connection, lack of power or wrong BIOS settings.
Declaration of Conformity We, manufacturer, Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD, HM MIL, HM CMD, HT STD, HD MMD, HM MMD, HT MMC, HD MMC and HT/HM (computers) product ranges is in conformity with the following standards in accordance with the EMC Directive.
Return Of Goods Information Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned.
General Terms and Conditions As of January 2015, Hatteland Display AS’ “Terms of Sales and Delivery” and “Warranty Terms” has been substituted by the updated ”General terms and conditions for sale of goods and performance of additional services” (the “General Terms and Conditions”).
Pixel Defect Policy PIXEL DEFECT POLICY Dot-defects (Bright or dark spots on the panel) Due to the effect that dot failures are part of the TFT technology such failure occurrence cannot be prevented basically. Even though dot defects usually occur during production process, new defects can appear within the lifespan of a TFT display. Neither the production at LCD-supplier nor the use of a LCD-Monitor after shipment can be influenced by Hatteland Display.
Notes General Notes: - The unit is type approved according to EN60945 4th, 4.4, equipment category b) protected from the weather. - Other type approvals applies for the different products. Please see the appropriate “Specifications” page in this manual for more information. - Use of brillance and Glass Display Control™ (touch key functions) may inhibit visibility of information at night.
User Notes Appendix IND100077-24 47
Revision History Rev. By Date Notes 00-1 SE 22 Feb 2012 Release for internal review. 01 AK PM SE 07 Mar 2012 First official release.
Revision History Appendix IND100077-120 49
w ww.hat tel and-di sp l ay .
