Product Manual

17
MAINTENANCE
Inspection Camera - After every use, the camera
should be cleaned and checked for possible damage.
External scuffing of the camera case is normal and
should be of no concern. The camera view port is made
of sapphire and should be cleaned with a soft, damp
cloth. Grease, dirt or scratches will affect the quality of
the video and if the lens is badly scratched it should be
replaced.
LED Light Replacement - The camera heads use LED
lighting and cannot be replaced by the operator. These
lights use very little power and unless physically dam-
aged or extreme voltage is applied to them, should last
indefinitely. If replacement is necessary, the camera
should be returned to the factory.
Reel and Cable Assembly Maintenance - The reel
and cable assembly should be kept clean from dirt,
slime, grit, etc. When winding the cable back onto the
reel after an inspection, it is good practice to use a
clean cloth to wipe off any debris.
WARNING
NEVER USE A POWER WASHER TO CLEAN
THIS EQUIPMENT. PRESSURIZED WATER
MAY GET INTO UNSEALED AREAS SUCH
AS THE REEL HUB ASSEMBLY AND SLIP
RING HOUSING CAUSING DAMAGE AND
VOIDING WARRANTY.