Product Manual

13
RECORDING TO A USB STICK
1. Press Recording Board Power button and wait for re-
cording system to boot up (about 15 seconds). Its red
light should now be on.
2. Insert the USB stick into the USB jack and wait for
the system to recognize its presence. This may take 5
seconds. A notification in the top left of the LCD will
show when the USB stick is recognized.
3. When the USB stick is recognized, press the recording
button on the control pad. This will power up the re-
cording module within the system. When it is ready
the system will say Recorder Ready”.
4. Press the red recorder button once. The system is now
recording the video file to the USB stick.
5. To stop the video recording simply press the stop re-
cording button.
Note: Video files are always stored in MPEG4 format for
optimal quality and file size. The longer a recording the
larger the video size.
Note: If the system does not record when USB inserted and
recording button is pressed then remove USB stick and re-
peat steps 1-4.