Product Manual

SETTING UP YOUR MONITOR

1. Press Recording Board Power button and wait for re-

cording system to boot up (about 15 seconds).

2. Press the Home button and navigate over to the

“Setup” screen. Press enter.

3. From this screen the user has the ability to change the

brightness, contrast, hue, saturation and noise reduc-

tion on the screen and video playback.

4. The user can also change the input of the camera from

NTSC to PAL to other resolutions. It is recommended

that users do not change this setting.

SETTING UP THE RECORDING QUALITY

1. Press the Home button and navigate over to the

“Setup” screen. Press enter.

2. Navigate to the right again until you reach the “REC”

tab. From here the user can adjust the recording quali-

ty and the recording device.

3. The recording quality is set as HQ (High Quality) at

the factory but the user has a choice of HQ, SP, LP, EP

and SLP in order of reducing quality but with smaller

file sizes.

4. The M7 system always records in MPEG4 format.

5. Do not change the recording device from USB to

HDD as an HDD is not installed. If this is changed no

recording can happen until changed back to USB.