Instructions / Assembly

8
STEP 6: SAFETY PAD ASSEMBLY
A) Lay the safety pad over the outer edge of the
circular frame. Be sure to cover all the springs,
as shown on the right.
B) Several sets of straps are attached to the
underside of the safety pad. Fasten these
straps to the jumping mat by threading them
through the triangular rings of the mat and
tying them in a knot. Alternatively, the straps
can be fastened to the frame tube by wrapping
them around a leg and tying in a knot. Refer to
the gure at the right to see how to attach the
straps correctly.
This is how the trampoline should look now.
INSTALLATION AND ASSEMBLY
TRAMPOLINE
ASSEMBLY (continued)