Instructions / Assembly
4
INSTALLATION AND ASSEMBLY
TRAMPOLINE PLACEMENT
LOCATION
• Adequate overhead clearance is essential. A minimum of 24 feet from ground level is recommended.
Provide clearance for wires, tree limbs, and other possible hazards.
• Lateral clearance is essential. Place the trampoline and trampoline enclosure away from walls,
structures, fences, and other play areas. Maintain a clear space on all sides of the trampoline and
trampoline enclosure.
• Place the trampoline and trampoline enclosure on a level surface (preferably grass) before use. Locating
the trampoline and trampoline enclosure on a hard surface will add stress to the frame, which over time
can cause damage that is not covered by the warranty. Placing the trampoline and trampoline enclosure
on an uneven surface may result in the trampoline and trampoline enclosure tipping over.
• Never place the trampoline and trampoline enclosure near water and keep sufcient space around them.
• Use the trampoline and trampoline enclosure in a well-lit area. Articial illumination may be required
for indoor or shady areas.
• Remove any obstructions from beneath the trampoline and trampoline enclosure.
• For additional stability, place sandbags on the U-shaped trampoline leg bases. This will prevent the
trampoline and trampoline enclosure from tipping over in the event of any sideways force.
RELOCATION
• Strong winds can blow the trampoline and trampoline enclosure over. If strong winds are predicted, the
trampoline and trampoline enclosure should be moved to a protected place, disassembled, or fastened to
the ground with at least three anchors and tie-downs.
• If possible, avoid moving the assembled trampoline and trampoline enclosure because they
could bend during transportation. If you must move the trampoline and trampoline enclosure
a short distance:
- Position at least four adults spaced evenly around the frame.
- Keep the trampoline and trampoline enclosure level as you lift and carry them. Avoid tilting or
dragging the trampoline and trampoline enclosure, which could cause them to bend or warp.
• To transport the trampoline and trampoline enclosure over long distances, disassemble them and return
them to their original packaging.