Instructions / Assembly

STEP 2: SAFETY NET ASSEMBLY

A) Ensure that the zippered entrance to the safety net is

located between two trampoline support legs, and

then place the safety net pole covers entirely over

the installed enclosure pole tubes. Starting from the

entrance, go left in a clockwise direction from one tube

to the next. Repeat until all the pole tubes are covered.

B) Pull the elastic strap with buckle along the

circumference of the safety net over the edge of the

trampoline and attach the buckle to the end of a

trampoline jumping mat eyelet, as shown below.

Do this until all elastic straps are attached and evenly

distributed, and the net is stretched out.

C) Now close the zipper of the safety net and fasten the

buckles along the zipper, as shown.

INSTALLATION AND ASSEMBLY

SAFETY ENCLOSURE ASSEMBLY (continued)