Instructions / Assembly

STEP 1: ENCLOSURE POLE ASSEMBLY

A) Connect each upper pole tube to a lower pole tube, as shown on the right.

The upper and lower pole tubes already come with foam tubes assembled.

B) Place the pole cap onto the top of the upper pole tube. Insert the pole bottom plug into the bottom of

the lower pole tube.

C) Align the holes of an assembled safety enclosure pole with the holes of a leg extension. Then secure

each safety enclosure pole to the trampoline frame with a quick clamp set, which includes a long bolt,

plastic spacer, washer, and nut.

For this step, it is best to have one person hold the enclosure pole in place while a

second person fastens the pole to the leg support.

INSTALLATION AND ASSEMBLY

SAFETY ENCLOSURE ASSEMBLY

• The trampoline enclosure is only to be used as an enclosure for a

trampoline of a size for which the enclosure is designed.

• Failure to exactly follow all instructions for assembling the safety

enclosure properly could result in the enclosure not functioning,

as intended, to keep the trampoline user from falling off the edge

of the trampoline, which may result in serious injury.

Two adults are needed to assemble the safety enclosure. Assemblers should

wear sturdy shoes to protect their feet and to prevent falling during assembly.

NOTICE

WARNING