Instructions / Assembly

THANK YOU!

Thank you for purchasing this product. We work around the clock and around the globe to ensure

that our products maintain the highest possible quality. However, in the rare case of issues during

assembly or use of this product, please contact our Consumer Hotline at 800-759-0977 for immediate

assistance before contacting your retailer. Please read the warranty information at the back of these

assembly instructions for further details.

ASSEMBLY

PARTS

1 NGP7428

2 NGP7429

LASER BODY

EVA PAD

AAA BATTERIES

(NOT INCLUDED)

ADDITIONAL EQUIPMENT

REQUIRED:

STEP 1:

STEP 2:

wall

7’ 9.25” (2.37m)

1. Mount your dartboard or dart cabinet. With one hand

place the Laser Dart Line on the wall or cabinet directly

below and centered on the dartboard. With your other

hand level the Laser Dart Line.

2. Locate the mounting holes and use a pencil to mark

the center of the holes on the wall or cabinet. Drill plot

holes, and use plastic anchors if mounting in drywall.

Insert screws and tighten. Before tightening the screws,

check that the Laser Dart Line is level.

3. Remove the top battery cover and insert 2 AA batteries.

Adjust Laser Line to 7’ 9-1/4” (2.37m) from face of dartboard

Wavelength:

635nm Max Power 5mW

Class IIIA Laser Product

Illustrations Not to Scale