SAFETY INSTRUCTIONS IB READ AND SAVE THESE INSTRUCTIONS Notice: The following content Is related to safety, users must abide by the following Instruct lens In order to properly use this product. Warning To reduce the risk of fire or electric shock, do not use this unit with any solid-state speed control device. Warning This appliance has a polarized plug (one blade Is wider than other).
BW Safety Tips Do not Insert fingers or foreign matter Into the ale-Inlet and outlet. Do not use In an environment filled with hydrogen, natural gas, propane and other flammable gases. Do not use the air purifier if the power cord or plug is damaged or the walls power socket has become loose. not block the alr Inlet or outlet. Do not operate the alr purifier without Installing the filter.
>jejeje/e]e Use 120V U.S. power supply only. Do nat place the machine near heat resources, such as gas stoves, or ovens. Do not use alcohol or organic solvents to clean the machine. Please unplug the power cord when cleaning. Use a dry cloth to clean the air purifiers surface. Use the grip on the back of the purifier to move It. Do not lift from the front panel.
B 5-in-1 Purification 5-stage Purification 1. Washable Pr-Filter A preliminary nylon per-filter removes large particles like pet hair, dust, and floating debris. This helps extend the life of the composite filter. 2. Polypropylene Liter Non-woven polypropylene materials serve as an extra ore-filter for the HEAP filter, capturing small corrosive particles. This extends the life of the H13 HEAP filter. 3. Medical Grade H13 HEAP Filter H13 Medical Grade HEAP filters 99.97% of particles down to 0.
ailments rt BW Machine Structure Front Panel Main Body Pr-Filter Laser Sensor Composite Filter Control Panel Panel Switch
WW Control Panel Instructions © (zEBReoO® PM Index, Timer, and Display Area Control Panel Introduction 1. Power: Turns purifier on and off. 2. Max: Sets the purifier to the maximum air purification speed (greater than high mode) for 60 minutes before returning to previous speed. 3. Speed: Choose from 4 different fan speeds (sleep, low, medium, and high). 4. Timer: Sets purifier on a timed mode (1 12 hours). Purifier will automatically shut-off when done. 5.
WM Air Quality Front Panel Display A precision laser sensor detects your air quality in real-time, reporting the true concentration of particulate matter (PM) in your air. Consistent with the Air Quality Index set by the EPA, a display on the top of the unit shows your live PM index reading, while a light strip on the front panel changes colors according to your EPA index score, so you can see the air quality from across the room.
WM Before Operation Before using for the first time, unpack the filters, remove the poly bag, and reinstall them. = While using the air purifier, please place it at least 6 feet away from devices that emit radio waves (such as TVs, radios or clocks), to prevent radio interference. = Do not install the sensor directly facing any air-outlet, or it may affect normal operation of the device.
B How to Remove Filters 1. Removing the Front Panel: Hold both sides of the front panel and pull towards you until the panel disconnects from the magnet. Do not pull too hard, to avoid damage. 2. Removing the Pr-Filter: Grab the center holders and lightly pull. The per-filter will pop out. 3. Removing the Composite Liter: Use the white tabs to pull the filter out. WM Liter Installation Composite Filter roc. Purlieu Front Panel installation Area 1.
MW Operation 10 Plug your purifier into the 120V outlet. Press Power button to turn the machine ON/OFF. Press MAX to set the purifier to the maximum speed. It will run on Max for 60 minutes before returning to the original running mode. Press SPEED to manually adjust the fan speeds from 1-4 (sleep, low, medium, and high). Press AUTO to switch your purifier to auto mode. In auto mode, the air purifier will automatically adjust based on the real time PM 2.5 Index.
MAINTENANCE BW Changing the Liters Your purifier will remind you to change your filters every 3,000 hours. This is a general recommendation based on the average household air quality and is not always specific to each customer's needs. For this reason, we recommend changing the filter every 4 months to optimize performance. IB Filter Replacement Reminder The AUTO and TIMER buttons flash on and off continuously, Indicating It Is time to replace the filters.
alias Leanne Problem Solution Machine not turning on? Check if the power cord is connected properly. Check if the front plate is closed properly. Air flow is reduced? Check If the filter poly bag Is removed. If not, remove It. Check if air inlet/outlet is blocked. If so, clean blockage. Check If filters are dirty. If 50, replace them. Ne Improved alr quality? Check if the filters are placed properly in the purifier. Sensor may be influenced by water vapor or fumes.
WARRANTY Dear Customer, Your purifier comes with a 5-year extended warranty and award-winning customer service. The 5-year warranty begins on the purchase date. All goods are guaranteed to be free from defects in materials and workmanship. Have an issue? We will gladly repair your product or replace it, as appropriate and at our discretion, free of charge.
