Manual

HATER
PAIN
TBALL
“HATRED
PM7/PMR Board”
HATRED Software
Version 4
Instruction Manual
Featur es:
 Designed from the ground up for the Proto Matrix 7 and
Proto Rail.
 The first ever paintball circuit board with a fully integrated
wireless transceiver!
 Fully compatible with all SYMBIO wireless products.
 Includes 22 firing modes including fully customizable ramp
modes.
 Proprietary multi-tasking algorithms continuously monitor all
trigger and eye events to ensure that all pulled shots register
and are processed.
 TEN TIMES faster than the top-ranked competitor! This
translates to 900,000 more operations per second than
anyone else.
 Fully adjustable ABS features add to the marker’s dwell to
eliminate that pesky first shot drop-off.
 Anti-mechanical bounce (AMB) algorithms solve the
problem of physical switch bounce. No need to worry when
the refs pull that old slow trigger pull trick on your gun.
 A “forced shot” feature allows the user to clear the marker of
eye faults.
 Instant on feature. After all, you wanna play now!
 Instantaneous battery status.
 Tournament lock feature allows the user to “lock out” the
programming mode in order to meet specific
field/tournament guidelines.
 Ready to accept Nicky Cuba’s signature series NUSKOOL
software upgrades.
Installati on:
MAKE SURE THE MARKER IS NOT CONNECTED TO AN AIR
SOURCE AND DOES NOT HAVE PAINTBALLS IN THE BREACH
DURING INSTALLATION!!!!!!
1. Remove the screws that secure the grips. This will expose
the board.
2. Unplug the eye ribbon, solenoid wires, and power wires.
3. Wiggle your old board out.
4. Slide your new HATRED board in. It’s purposely a tight fight
so you may have to use some force.
5. Plug in your eye ribbon, power, and solenoid wires.
6. Replace grips.
Power :
Power On: The HATRED board comes equipped with an Instant On
feature. Simply press the power button (top button) and your marker
will instantly power on. As long as the power button is depressed, you
will see a flickering GREEN or RED led. The GREEN indicates a good
battery and the RED means replace the battery as soon as possible.
Regardless of GREEN/RED battery indication, your marker WILL
REGISTER YOUR FIRST TRIGGER PULL! Please be careful!
Power Off: To turn the marker off, press and hold the power button until
the LED goes through a rainbow power down sequence. Please note
that this particular rainbow LED sequence does NOT indicate that
you’re entering the programming menu.
Pr ogr ammi ng
The bottom dip switch must be in the OFF position in order to enter the
programming menu. If the bottom dip switch is ON, “tournament lock”
will be enabled and the user will be unable to program the marker.
To enter the programming menu, hold the trigger down and THEN turn
the marker on. The LED will inform the user that the programming
mode has been accessed by flashing several colors rapidly.
LED Color
Setting
Default
Setting
Adjustable
Range
Purple
Fire Mode
1
1-22
Green
Debounce
5 ms
1-50 ms
Red
Dwell
18 ms
5-35 ms
Blue
Max ROF
20 cps
10-35 cps
Teal
AMB
1 ms
(1 = AMB
Disabled)
1-60ms
Yellow
Eye Delay
4 ms
1-20 ms
White
Wireless
Address
1
1-32
Flickering
Purple
ABS
10 ms
1-20 ms
Flickering
Green
Ramp
Activation
9 bps
6-15 bps
Flickering
Red
Ramp Percent
10%
1-20
(10-200%)
Flickering
Blue
Reset Defaults
n/a
n/a
1.) Pulling and releasing the trigger will allow the user to toggle
through the different programming options.
2.) Once the desired setting/LED color is reached, pull and hold the
trigger to select that setting. The LED will then go blank.
3.) Once the LED goes blank, pull the trigger for the desired setting.
For example, if the user wishes to set the debounce to 2, he or
she must pull the trigger two times.
➠If the user wants to view their current value for a particular
setting, he or she need only to continue holding the trigger in after
the setting is selected from the menu. The software will then
blink back the user’s current value for that particular setting.
4.) The software will indicate that the new value has successfully
been entered by blinking the value back to the user then rapidly
flashing the LED through a spectrum of colors.
➠As the software blinks back the new setting, the user may abort
this process by simply clicking the trigger once. The new settings
will still be saved.
5.) After a setting has been changed, the user may change another
option or power the gun off to save the settings.
NOTE: All “programming clicks” correspond exactly to their settings. If
you want to cap the ROF at 15, pull the trigger 15 times. If the user
sets the value too low (2 cps ROF cap for example), the software will
automatically default to the lowest accepted value. The inverse is also
true for user inputs which are beyond the adjustable range.
Pr ogr ammi ng Ex amples:
To set the firing mode to PSP mode.
1. Turn the marker off.
2. Hold the trigger down; then turn the marker on. Once the LED flashes many
colors, release the trigger.
3. Tap the trigger until the LED turns purple.
4. Hold down the trigger until the LED goes blank.
5. Tap the trigger two times.
6. Once the LED flashes many colors, turn the marker off.
To set the eye delay to 5 ms.
1. Turn the marker off.
2. Hold the trigger down; then turn the marker on. Once the LED flashes many
colors, release the trigger.
3. Tap the trigger until the LED turns yellow.
4. Hold down the trigger until the LED goes blank.
5. Tap the trigger 5 times.
6. Once the LED flashes many colors, turn the marker off.
To set the max ROF to 15 bps.
1. Turn the marker off.
2. Make sure the top dipswitch (dipswitch 1) is in the ON/UP position.
3. Hold the trigger down; then turn the marker on. Once the LED flashes many
colors, release the trigger.
4. Tap the trigger until the LED turns blue.
5. Hold down the trigger until the LED goes blank.
6. Tap the trigger 15 times.
7. Once the LED flashes many colors, turn the marker off.
Dip Sw itch Settings:
Switch
UP
DOWN
1
(top)
ROF Cap ON
ROF Cap OFF
2
(bottom)
Tournament
Lock
Programming
Mode
Eye Sensor Oper ation:
When the HATRED Board is powered on, the eyes are enabled by
default. To disable the eyes, press and hold the eye button on your
marker.
➠When the eyes are disabled (blinking red LED), your ROF will default
to the user programmed global ROF cap.
➠When there is an EYE FAULT (blinking blue LED), your ROF will
automatically default to 15 cps.
LED Representation:
Solid Blue Eyes on; Paint in breach.
Blinking Blue Eyes on w/ blocked/dirty error.
Solid Red Eyes on; No paint in breach.
Blinking Red Eyes disabled.
Fir ing Modes:
(Please note the firing mode order on the back of the HATRED box does not
correspond the actual order.)
1. Semi Auto/NPPL – 1 trigger pull = 1 shot fired.
2. PSP Mode – The first three shots are semi auto. On the 4
th
shot,
the gun will shoot in 3 shot bursts. This burst mode will continue
as long as the trigger is being pulled. After a one second delay of
trigger inactivity, the 3 shots semi-auto sequence will restart.
➠The global ROF cap must be set to 13 to cap the marker at
13.33 bps to comply with PSP rules.