User Guide

PROGRAMMING THE UNIT
Form No. TF20M-06037
GENERAL
Thermo-Finisher
™
units (except TF-2005, TF-2010
and TF-2045) have both an upper and lower heating
zone. The upper elements heat the product on the plate
and the lower elements heat the center of the plate.
Five adjustable program button selections allow
the operator to fine tune the radiant heat input
and heating time for a variety of menu items. This
adjustable feature assures optimum serving temperatures
without effecting quality.
Thermo-Finisher units also feature an adjustable “Idle”
mode and adjustable “Auto-Off” mode, which allow
for additional flexibility.
NOTE: After reading and understanding how
to program the unit, see Programming Hints
and Recommended Food Finishing Guide in this manual
for further helpful information.
Figure 6. Control Panel
LOWER HEAT
UPPER HEAT
Power
ON/OFF
Switch
Lower
Heat
Indicator
Upper
Heat
Indicator
UP Button
DOWN Button
Digital Display
Enter Button
Program
Indicator Lamp
Program
Selection
Buttons