GLO-RITE ® Display Light HL Series Installation & Operating Manual I&W #07.05.077.
CONTENTS Mounting .................................................................3 Electrical Wiring Hook-Up .....................................3 Operation .................................................................3 Maintenance ...............................................................4 Cleaning ..................................................................4 Display Light Bulb Replacement............................4 Hatco Limited Warranty...........................................
IMPORTANT SAFETY INSTRUCTIONS ! 4. When using chains for unit installation, chains must be sufficient strength and securely fastened or the lamp could come loose, possibly causing personal injury or damage to the unit. WARNINGS/CAUTIONS Read the following important safety instructions to avoid personal injury and/or damage to the equipment. 5. Use only non-abrasive cleaners.
SPECIFICATIONS ELECTRICAL RATING CHART Model Total Lamps Total Watts Total Amps Shipping Weight Model Total Amps Shipping Weight HL-18 2 120 1.0 6 lbs. (3 kg) HL-48 4 240 2.0 12 lbs. (5.5 kg) HL-24 2 120 1.0 7 lbs. (3 kg) HL-48-2* 7 420 3.5 13 lbs. (6 kg) HL-24-2* 3 180 1.5 7 lbs. (3 kg) HL-54 4 240 2.0 14 lbs. (6.5 kg) HL-30 2 120 1.0 8 lbs. (4.5 kg) HL-54-2* 8 480 4.0 15 lbs. (7 kg) HL-30-2* 4 240 2.0 8 lbs. (4.5 kg) HL-60 5 300 2.5 17 lbs.
INSTALLATION MOUNTING 1. Remove the unit from the carton and remove all packing materials. 2. Remove information packet. To prevent delay in obtaining warranty coverage, fill out and mail in warranty card. 3. The unit is equipped with mounting brackets as shown in Figure 3 for chain mounting or mounting under a shelf or pass-through station. ! WARNING Chain must be sufficient strength and securely fastened or the lamp could come loose, possibly causing personal injury or damage to the unit. Figure 3.
MAINTENANCE CLEANING DISPLAY LIGHT BULB REPLACEMENT The Hatco Display Light is designed for maximum durability and performance, with minimum maintenance. The display light is a shatter-resistant, incandescent light bulb which illuminates the area. The bulb has a special coating to guard against injury and food contamination in the event of breakage. ! WARNING To avoid any injury, turn the power switch off, unplug the unit from the power source and allow to cool before performing any maintenance. 1.
HATCO LIMITED WARRANTY THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT INFRINGEMENT.
HATCO AUTHORIZED PARTS DISTRIBUTORS ALABAMA Jones McLeod Appl. Svc. Birmingham 205-251-0159 LOUISIANA (Continued) Bana Comm. Parts, Inc. Shreveport 318-631-6550 ARIZONA Auth. Comm. Food Equip. Phoenix 602-234-2443 Byassee Equipment Co. Phoenix 602-252-0402 MARYLAND Electric Motor Service Baltimore 410-467-8080 GCS Service, Inc. Silver Spring 301-585-7550 CALIFORNIA Industrial Electric Huntington Beach 714-379-7100 Chapman Appl. Service San Diego 619-298-7106 P & D Appliance S.
