User Manual

Battery diagram

CR2450

3 V

Initial use

Battery positive pole

This side outside when

install battery

Battery negative pole

This side inside when

install battery

1. Open battery cover at the back of product, install

battery with battery negative pole inside, then tighten

the cover;

2. Download and install our software on a Windows OS

PC, Running it;

3. Insert the USB logger to computer by the USB port;

4. Wait until the software auto scanning the USB logger,

and calculate the data arrays. (10s to 5 Mins);

5. Select “parameter” Tab, and initialize the parameter

configuration.

6. Manually change the pamrameters according to your

requirement, remember to saving the parameters.

5. Pull off the logger from PC, ready for use.

Logger Dimension: 101 mm * 40 mm * 11.5 mm (H * W * D)