User's Manual

Answering calls
 When a call is received you will hear the ringing through the headset and
the indicator flashes blue.
 Press the Power/Talk (그림) button to accept the call.
 To end the call, press the Power/Talk(그림) button.
Rejecting calls
 To reject calls, press either the Volume Up (그림) button or Volume Down
(그림) button.
 For this function to work, you mobile phone needs to support the reject
function.
The reject function is possible when the Headset is connected to a
mobile phone based on a Hands-free Profile, not a Headset Profile.
Making calls using your mobile phone
[using your mobile phone]
Make sure that your headset is connected to your mobile phone by checking
your headset indicator flashes blue every 5 seconds.
 Using the phone’s keypad, dial the required number.
 Send the call from the phone (Phone initiates the call.)
 The call will automatically transfer to the headset. But for some phones,
you must press the Power/Talk (그림) button for 3 seconds to make the
call transfer to the headset. Please refer to your phones user guide.
 To end the call, press the Power/Talk (그림) button.
[using the re-dial function for the last call]
 With your headset, you can re-dial the last call dialed or received.
 Press Power/Talk (그림) button.
 After you hear the short beep, you will hear the dialing tones from
speaker.
 To end the call, press Power/Talk (그림)button.
[using Voice dialing]
 To make calls using your headset, your mobile phone needs to support
voice dialing and the feature must be activated.
 Press Volume Up button or Volume Down (그림) button for 3 seconds
and you can hear a short beep. Voice dial as you normally would.
 To end the call, press the Power/Talk (그림)button.
It is dependent on a mobile phone’s function and is possible when
a mobile phone supports a Hands-free profile.
Using the headset