User's Manual

pairing with the headset. In this case, the indicator light flashes blue
once every 5 seconds. It’s dependent on phone models.
It’s better to try to pair your headset with the phone close-by.
Once you have paired your headset with the phone, you don’t need to
pair it again until you want to use it with another phone.
In a pairable mode, if the headset is not paired with a mobile phone
for 3 minutes, the headset will be turned off automatically.
When you want to use it with another phone
When you want to use your headset with another phone that isn’t the phone
that you paired your headset with, you need to pair it again.
 Press and hold the either the Volume Down (그림) button or’ Volume-
down’ button and Power/Talk (그림)button for 3 seconds together. Then,
the headset indicator light flashes blue every 1 seconds and your headset
is now ready for paring.
PICTURE
 Prepare your phone according to the phone’s user manual on pairing.
 Continue according to the instructions in the phone’s user manual.
 The default passkey of the headset is [0000].
 When pairing has been completed, the headset indicator light flashes blue
twice every 3 seconds.
Automatic re-connection
If you set your headset as a automatic re-connection mode, your headset will
be re-connected automatically within 10 m with your mobile phone after
disconnected with your phone.
 To set the automatic re-connection mode, press Volume-Up (그림) button
and Volume down (그림) button together.
 To cancel the automatic re-connection mode, press Volume-Up (그림)
button and Volume down (그림) button together.