User's Manual

ManualsBrandsHASSNET ManualsAudio EquipmentHASSNET Mono Headset With Bluetooth

1. Introduction

wiREVO Headset BHE20 will lead you to the mobility. BHE20 allows you freedom

to make and receive calls while on the move or in the office. The main function

of wiREVO BHE20 is as follows;

• Wireless Hands-free

Read this user’s guide carefully before using the Headset.

Bluetooth Wireless Technology

wiREVO BHE20 is specially designed for any compatible Bluetooth devices that

support the following profiles. (Profile is a set of Bluetooth commands that the

devices use to control the headset.)

• Hands-free profile

• Headset profile

The Bluetooth technology makes it possible to connect compatible communication

devices without using cables. The Bluetooth connection does not require that the

phone and the Headset are in line of sight, but both devices should be 10 meters

of each other, although the connection can be subject to interference from

obstructions, such as walls, or other electronic devices.

BHE20 is compliant with and adopts the Bluetooth Specification 1.2. For more

information on the compatibility between wiREVO with other Bluetooth-enabled

products, please check with your dealer.

(Limited Liability)

Neither the Manufacturer, importers nor dealers is responsible for any accidental

damage including bodily injury or any damage resulting from misuse or unsuitable

operation by you. The information on this manual is prepared with the current

headset specifications. The manufacturer, wiREVO, is adding new features to the

product and may persistently apply new technologies hereafter. All standards may

be changed at any time without notice.

Summary of content (12 pages)

PAGE 1
. Introduction wiREVO Headset BHE20 will lead you to the mobility. BHE20 allows you freedom to make and receive calls while on the move or in the office. The main function of wiREVO BHE20 is as follows; • Wireless Hands-free Read this user’s guide carefully before using the Headset. Bluetooth Wireless Technology wiREVO BHE20 is specially designed for any compatible Bluetooth devices that support the following profiles. (Profile is a set of Bluetooth commands that the devices use to control the headset.
PAGE 2
. Guidelines for your safety Before use, read the warnings and other information in this manual. Please check for any information on RF exposure in usage of Bluetooth headset. When your headset is turned on, it transmits and receives radio frequency electromagnetic fields in the frequency range 2.402 ~ 2.480 GHz.
PAGE 3
Use batteries and chargers only provided and approved by Hassnet. The batteries are consumables and will eventually wear out. Avoid charging in strong heat or extreme cold. Ambient room temperature is preferable. The battery has its optimum performance at an ambient temperature (+5 ℃ to +50℃). Never replace the battery by a non-approved battery. Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin.
PAGE 4
Before Using the headset 1. What’s in the box? 2. Features at a glance FRONT / BACK 3. Putting on the headset This is designed to be used for both ears. In a box, it’s set to be used for a right ear. 4. Fixing a ear-loop Hold the earloop and pull to the direction of arrow to detach it from the body. Overturn the detached ear-loop as image. Fix the overturned ear-loop to the direction of arrow. 5. Charging Before using the headset for the first time, make sure the headset is fully charged.
PAGE 5
Plug in the charger to the headset. When the battery is fully charged, the indicator light is turned to Blue. It takes about 2 hours to fully recharge the battery. Low battery indication The headset will generate repeated warning beeps every 10 seconds. The indicator blinks three times in Red. As soon as you detect the low battery you should charge the headset. When you hear the beep during a call, it’s better to transfer the call to your mobile phone as soon as you can.
PAGE 6
Pairing/Connecting the headset 1. Turning the headset ON/OFF To turn the headset on: Press and hold the Power/Talk (그림)button for more than 5 seconds. The indicator blinks in blue and you will hear a do-re-mi tone. The headset is now turned on. [PARING MODE] When the headset is turned on for the first time, it will automatically be ready for paring: When this happens, the headset indicator light flashes blue every 1 seconds.
PAGE 7
pairing with the headset. In this case, the indicator light flashes blue once every 5 seconds. It’s dependent on phone models. It’s better to try to pair your headset with the phone close-by. Once you have paired your headset with the phone, you don’t need to pair it again until you want to use it with another phone. In a pairable mode, if the headset is not paired with a mobile phone for 3 minutes, the headset will be turned off automatically.
PAGE 8
Using the headset Answering calls When a call is received you will hear the ringing through the headset and the indicator flashes blue. Press the Power/Talk (그림) button to accept the call. To end the call, press the Power/Talk(그림) button. Rejecting calls To reject calls, press either the Volume Up (그림) button or Volume Down (그림) button. For this function to work, you mobile phone needs to support the reject function.
PAGE 9
Transferring calls To transfer the phone call between your phone and your headset or vice-versa, while on the line, press the Power/Talk (그림) button for 3 seconds.
PAGE 10
Audio & Visual Indicators Indicator Light Chart State of Headset In process of Power Off Power Off In process of Power On Pairing Mode Connectable Mode Connected Mode Incoming call On the line Charging in process Charging complete State of Indicator light Blue blink Off Blue blink Flashes Blue every 1 seconds Flashes Blue twice every 3 seconds Flashes Blue every 5 seconds Flashes Blue Off Red is on Blue Beep Tone Chart State of Headset In process of Power Off In process of Power On Success Mode Change Sta
PAGE 11
Specification & Certifications 1. Brief Specification Bluetooth Compliance Frequency Range Transmission output power Maximum Cordless Distance Dimension of Headset Weight of Headset Operating Temperature Relative Humidity Typical Standby time Typical Talk time Typical Recharging time Battery Type Charger Rated input Charger Rated output • Bluetooth 1.2 with Headset Profile & Hands-free Profile 2.402 ~ 2.480 GHz 0.25 ~ 2.5mW 30 feet (10 meters) 58mm * 21mm * 12mm 12.
PAGE 12
2. Certifications CE B FCC This Product is CE marked according to the provisions of the R&TTE Directive 1995/05/EC. Hereby, Hassnet, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1995/05/EC. For more information please consult http://www.wirevo.com. BLUETOOTH is a trademark owned by the Bluetooth SIG, Inc. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.