User manual
Table Of Contents
- 1 Product Profile
- 1.1 Introduction
- 1.2 Feature Highlights
- 1.3 Specifications
- 1.4 Charging the Battery
- 1.5 Mounting the Lens
- 1.6 Mounting the Lens Shade
- 1.7 Inserting the Memory Card
- 1.8 Attaching the Shoulder Strap
- 2 Functions
- 3 Settings
- 4 Phocus Mobile 2 and Phocus
- 5 Appendix
64
X2D 100C
User Manual
CONTENTS
2.9 BUILT-IN SSD
The X2D 100C has a built-in 1TB SSD to store images. Connect the camera to a computer to
use the built-in SSD as mass storage for data read/write.
Storing Files to SSD
Go to Main Menu > Storage > Primary Slot, and select SSD. Check the free space of the SSD
in the Info section.
Formatting SSD
Formatting SSD will erase all the contents on the SSD. Operate with caution.
1. In the Storage settings, scroll to the bottom and select Format SSD.
2. Press the circle button to the right of the touch display to perform formatting.
3. Wait for formatting to be completed.
Checking SSD Storage Status
Check the SSD storage status on Control Screen or the top display.
Using the SSD as Mass Storage
1. Connect camera to a computer using a USB-C cable of USB 2.0 or above.
2. Tap Mass Storage in the pop-up dialogue on the camera touch display.
will be shown
on the touch display while
will be shown on the top display.
3. The camera SSD will be connected to the computer as a mobile storage device and data
read/write to the SSD is available.
After the camera is connected to the computer, if Skip is selected on the touch display, the
built-in SSD will not be connected to the computer. Reconnect the camera to the computer
and select the correct option.