User manual
Table Of Contents
- 1 Product Profile
- 1.1 Introduction
- 1.2 Feature Highlights
- 1.3 Specifications
- 1.4 Charging the Battery
- 1.5 Mounting the Lens
- 1.6 Mounting the Lens Shade
- 1.7 Inserting the Memory Card
- 1.8 Attaching the Shoulder Strap
- 2 Functions
- 3 Settings
- 4 Phocus Mobile 2 and Phocus
- 5 Appendix
60
X2D 100C
User Manual
CONTENTS
Single
In this mode, the camera will make one exposure only regardless of how long the shutter
release button is pressed.
Continuous
The camera will make exposures as long as the shutter release button is pressed.
Self Timer
The camera will wait a preset time to make the exposure after the shutter release button is
pressed.
Time: a delay between shutter release and exposure.
When Finished: determines if the function shall be active after a completed cycle or not. If
set to Exit, the drive mode will be set to Single or Continuous automatically after exposure.
After the shutter release button is fully pressed, the touch display, EVF, and top display will
show the countdown screen. The camera will take photos automatically after the preset
countdown ends. Press the delete button to the right of the touch display to exit during the
countdown.
80%
200
5.6 90
f/
EV
+1.512.0
+0.7
CFe
SSD
ISO
Drive Mode Self Timer
Time
10s
Single
Continuous
Self Timer
Exposure
Bracketing
Interval
When Finished
Exit
Self Timer
10
Exit