User manual
Table Of Contents
- 1 Product Profile
- 1.1 Introduction
- 1.2 Feature Highlights
- 1.3 Specifications
- 1.4 Charging the Battery
- 1.5 Mounting the Lens
- 1.6 Mounting the Lens Shade
- 1.7 Inserting the Memory Card
- 1.8 Attaching the Shoulder Strap
- 2 Functions
- 3 Settings
- 4 Phocus Mobile 2 and Phocus
- 5 Appendix
X2D 100C
User Manual
CONTENTS
18
1.5 MOUNTING THE LENS
The instructions below uses an XCD lens as an example. A lens adapter is required when
using other lenses.
1. Press the lens removal button while turning the protection cover lid to remove the
protection cover lid from the camera body.
2. Remove the lens caps and align the red dot on the lens with the red dot on the lens
mount of the camera body. Attach the lens to the camera body and turn the lens
clockwise until it clicks into place.
3. Make sure that the lens is firmly secured to the camera body before use or movement.
To remove the lens, press the lens removal button while rotating the lens counterclockwise.
Attach the lens protection caps on the detached lens to prevent damage.
• Be careful when attaching or removing the lens to prevent damage to the metal terminals
on the camera or lens.
• Do not insert fingers or any other objects into the camera body. This can cause damage to
the equipment.
• Attach the protection cover lid to the camera body after removing the lens.