User manual
Table Of Contents
- 1 Product Profile
- 1.1 Introduction
- 1.2 Feature Highlights
- 1.3 Specifications
- 1.4 Charging the Battery
- 1.5 Mounting the Lens
- 1.6 Mounting the Lens Shade
- 1.7 Inserting the Memory Card
- 1.8 Attaching the Shoulder Strap
- 2 Functions
- 3 Settings
- 4 Phocus Mobile 2 and Phocus
- 5 Appendix
117
X2D 100C
User Manual
CONTENTS
XH CONVERTER 0,8
CP.HB.00000627.01
The XH Converter 0,8 is an accessory for
using HC/HCD lenses on X System cameras.
It reduces the focal length of the attached
lens by a factor of 0,8x as well as increases
the maximum and minimum aperture with
2/3 stops.
The following cameras and lenses are
supported:
• Hasselblad X System cameras, X2D
100C with firmware 1.0.0 or later, X1D
with firmware 1.25.0 or later, or X1D II
50C/907X/CFV II with firmware 1.4.0 or
later.
• All Hasselblad HC and HCD lenses,
except HC120 and HC120-II with
firmware older than 18.0.0.
• Only certain functions of the camera are
supported when using an H System lens.
• Lenses with firmware 18.0.0 to 19.0.3
must be updated to 19.1.0 or later. Lenses
with firmware older than 18.0.0 will have
manual focus only.
• HCD lenses were originally designed for a
smaller format than HC lenses. Therefore
some reduction of performance in
extreme corners can occur.