User manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Lenses
- 4 Functions
- 4.1 Parts, Components, Buttons and Controls
- 4.2 Grip Buttons and Controls
- 4.3 Camera Body Buttons and Controls
- 4.4 Mode Dial
- 4.5 Exposure Program Modes
- 4.6 The X1D II Interaction Displays
- 4.7 Touch Display Navigation
- 4.8 Navigating the Menus
- 4.9 Touch Display Main Menu
- 4.10 Control Screen
- Locked Exposure Parameters on the Control Screen
- Settings on the Control Screen
- Self Timer settings
- Interval settings
- Interval Operation
- Exposure Bracketing settings
- Exposure Bracketing Operation
- Long Exposure Screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed Exposure Compensation Setting
- Exposure Compensation / Quick Adjust
- Light Meter Mode
- 4.11 Video Recording
- 4.12 Connector Ports
- 4.13 Memory Cards
- 4.14 Stop Down Button
- 4.15 Live View indications
- 4.16 Focusing
- 4.17 Move Autofocus Point
- 4.18 Resize Autofocus Point
- 4.19 Move Autofocus Point using Touchpad
- 4.20 Change Settings on the Grip
- 4.21 Browsing, Preview and Histogram
- 4.22 Image Rating
- 5 Settings
- 6 Phocus
- 7 Accessories
- 8 Appendix
X1D II 50C USER GUIDE www.hasselblad.com
86
FUNCTIONS
Contents
Manual focus setting
Manual focus can be used at any time even in Auto Focus
Mode. You can also switch to Manual Focus Mode and only
use the Focus Ring manually on the lens.
For users who prefer manual focus control but would like the
benetsofautofocus,onemethodistousetheAF-Dbutton
set to AF Drive. Align the AF area with the subject and press
the AF-D Button. The camera uses the Autofocus system to set
correct focus and reverts immediately to manual focus control
when the button is released. Therefore, you can recompose
the picture without having to maintain pressure on the release
button in order to retain the newly automatically made focus
setting.
Manual Focus in Live View
1 Double tap the Touch Display, or press the Star Button
(C)
,
to Zoom in to selected Focus Area.
2 Adjust Focal Point manually on the Lens.
Note that you have two Focus Assist options to help you
set focus accurately.
- Auto Zoom to 50% or 100%.
- Focus Peaking (see next page).
In Auto Zoom Live View will automatically zoom to 50% or
100% when the focus ring is turned. After a few seconds of
inactivity, Live View returns to full image.
Also see 114.
3 Double tap or press on the Star Button again to Zoom out
to Display the entire Capture.
Using these modes will ensure accurate and precise focusing.
Auto Zoom is the most accurate and Focus Peaking is the
fastest to use.
MANUAL FOCUS
Live View
Auto Zoom to 50%. Subject not in focus.
Auto Zoom to 50%. Focus set correctly.