User manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Lenses
- 4 Functions
- 4.1 Parts, Components, Buttons and Controls
- 4.2 Grip Buttons and Controls
- 4.3 Camera Body Buttons and Controls
- 4.4 Mode Dial
- 4.5 Exposure Program Modes
- 4.6 The X1D II Interaction Displays
- 4.7 Touch Display Navigation
- 4.8 Navigating the Menus
- 4.9 Touch Display Main Menu
- 4.10 Control Screen
- Locked Exposure Parameters on the Control Screen
- Settings on the Control Screen
- Self Timer settings
- Interval settings
- Interval Operation
- Exposure Bracketing settings
- Exposure Bracketing Operation
- Long Exposure Screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed Exposure Compensation Setting
- Exposure Compensation / Quick Adjust
- Light Meter Mode
- 4.11 Video Recording
- 4.12 Connector Ports
- 4.13 Memory Cards
- 4.14 Stop Down Button
- 4.15 Live View indications
- 4.16 Focusing
- 4.17 Move Autofocus Point
- 4.18 Resize Autofocus Point
- 4.19 Move Autofocus Point using Touchpad
- 4.20 Change Settings on the Grip
- 4.21 Browsing, Preview and Histogram
- 4.22 Image Rating
- 5 Settings
- 6 Phocus
- 7 Accessories
- 8 Appendix
X1D II 50C USER GUIDE www.hasselblad.com
76
FUNCTIONS
Contents
1
2
3 4
No Card is inserted.
Card #1 is inserted and ready
for captures.
The Card is full.
Card error.
Card read/write speed
is slow.
Card #1 is inserted and
is locked for captures as
indicated by the secondary
Lock Icon.
Additional secondary icons:
The Card is full.
The Card is locked.
No Card.
Card error.
Backup mode selected, but
no second card is inserted.
Status group
(3)
normally displays the
remaining captures, but can also show:
4.13 MEMORY CARDS
The X1D II camera uses SD cards only. There
are two SD Card slots on the X1D II Camera,
slot no 1
(1)
and slot no 2
(2)
.
Thelecounter(
3
) is an estimate of how many
more captures can be made on the active card
Note!
All cards must be formatted in the X1D II
camerabeforerstuse.
SD Memory Card Status Display
The symbols in the status group
(4)
on the
Control Screen:
Live View when no card is inserted