User manual

X1D II 50C USER GUIDE www.hasselblad.com
66
FUNCTIONS
Contents
1
A
B
C
1 2 3
4
Control Screen
Live View
FOCUS BRACKETING OPERATION
An active and pending Focus Bracketing function
is indicated both on the Control Screen and in
Live View ( A ).
In the example on the right, the Focus Bracketing
sequence will take 40 images.
To start the sequence, simply press the shutter
release and all captures will be made automati-
cally. If required, you can set a delay before the
rstcapture.Aseparatedelaycanalsobeset
between frames to minimize vibration or to allow
aashtocharge.
The live view screen will indicate a pending focus
bracketing sequence ( B ).
During the Focus Bracketing sequence, the rear
screen and EVF will show the selected Browse
Overlay with an extra information overlay, as
shown in ( C ).
1 Focus Bracketing Icon.
2 Remaining captures.
3 Number of captures in the sequence.
4 Focus adjustment step between captures.
To exit from the sequence before it has been
completed, press the Cross Button ( 5 ).
After a completed sequence, the last image will
show up on the rear screen.
Note!
The Focus Bracketing function requires a
rmwareupdatefortheLens.Useversion0.5.33
or later for XCD lenses. The XCD 45P requires
0.1.24 or later.
Note!
HC/HCD lenses cannot be used for Focus
Bracketing.
Note!
Focus Bracketing is not supported in Phocus
Mobile or when tethered to Phocus.
Note!
Light measurement, focusing and Auto White
Balanceareperformedbeforetherstexposure
and are applied to all images in the sequence.