User manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Lenses
- 4 Functions
- 4.1 Parts, Components, Buttons and Controls
- 4.2 Grip Buttons and Controls
- 4.3 Camera Body Buttons and Controls
- 4.4 Mode Dial
- 4.5 Exposure Program Modes
- 4.6 The X1D II Interaction Displays
- 4.7 Touch Display Navigation
- 4.8 Navigating the Menus
- 4.9 Touch Display Main Menu
- 4.10 Control Screen
- Locked Exposure Parameters on the Control Screen
- Settings on the Control Screen
- Self Timer settings
- Interval settings
- Interval Operation
- Exposure Bracketing settings
- Exposure Bracketing Operation
- Long Exposure Screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed Exposure Compensation Setting
- Exposure Compensation / Quick Adjust
- Light Meter Mode
- 4.11 Video Recording
- 4.12 Connector Ports
- 4.13 Memory Cards
- 4.14 Stop Down Button
- 4.15 Live View indications
- 4.16 Focusing
- 4.17 Move Autofocus Point
- 4.18 Resize Autofocus Point
- 4.19 Move Autofocus Point using Touchpad
- 4.20 Change Settings on the Grip
- 4.21 Browsing, Preview and Histogram
- 4.22 Image Rating
- 5 Settings
- 6 Phocus
- 7 Accessories
- 8 Appendix
X1D II 50C USER GUIDE www.hasselblad.com
58
FUNCTIONS
Contents
A
●
Self Timer
The camera will wait a pre-set time to make the exposure
after the Shutter Release Button is pressed.
Time:
Delay between Shutter Release and exposure.
LED Blink:
Controls if the front LED shall be used to
indicate Self Timer operation.
When Finished:
Determines if the function shall be
active after a completed cycle or not. If set to
Exit
, the
Self Timer is disabled after the exposure.
●
Interval
The camera will make a pre-determined number of
exposures with a pre-set interval time.
Time:
The time between exposures.
Frames:
How many exposures will be made.
Initial Delay:
ADelaybetweenShutterReleaseandrst
exposure.
Metering:
Exposuremeteringforallframesorrstframe
only.
When Finished:
Determines if the function shall be
active after a completed cycle or not.
●
Exposure Bracketing
The camera will automatically make a pre-determined
number of exposures with a pre-set exposure adjustment
difference between each frame.
Amount:
How much exposure difference between each
exposure.
Frames:
The number of exposures in the sequence.
Initial Delay:
ADelaybetweenShutterReleaseandrst
exposure.
Param in M:
Which of Aperture or Shutter Speed to
change if Exposure bracketing is used in Manual mode.
When Finished:
Determines if the function shall be
active after a completed cycle or not.
●
Focus Bracketing
The camera will automatically take a pre-set number of
images and calculate a focus shift between each capture.
Step Size:
Amount of focus position change between
each capture.
Frames:
The number of exposures in the sequence.
Initial Delay:
ADelaybetweenShutterReleaseandrst
exposure.
Exposure Delay:
A delay between exposures.
Sequence:
The order in which captures are made.
When Finished:
Determines if the function shall be
active after a completed cycle or not.
For
Self Timer
,
Interval
,
Exposure Bracketing and Focus
Bracketing
the left part of the panel displays the current
setting. If no changes are required, tap the function icon again
to make it active.
To change any of the parameters, tap the right part of the screen
(
A
). This will bring up the dedicated settings for the function.
Self Timer
Exposure Bracketing
Focus Bracketing
Interval