User manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Lenses
- 4 Functions
- 4.1 Parts, Components, Buttons and Controls
- 4.2 Grip Buttons and Controls
- 4.3 Camera Body Buttons and Controls
- 4.4 Mode Dial
- 4.5 Exposure Program Modes
- 4.6 The X1D II Interaction Displays
- 4.7 Touch Display Navigation
- 4.8 Navigating the Menus
- 4.9 Touch Display Main Menu
- 4.10 Control Screen
- Locked Exposure Parameters on the Control Screen
- Settings on the Control Screen
- Self Timer settings
- Interval settings
- Interval Operation
- Exposure Bracketing settings
- Exposure Bracketing Operation
- Long Exposure Screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed Exposure Compensation Setting
- Exposure Compensation / Quick Adjust
- Light Meter Mode
- 4.11 Video Recording
- 4.12 Connector Ports
- 4.13 Memory Cards
- 4.14 Stop Down Button
- 4.15 Live View indications
- 4.16 Focusing
- 4.17 Move Autofocus Point
- 4.18 Resize Autofocus Point
- 4.19 Move Autofocus Point using Touchpad
- 4.20 Change Settings on the Grip
- 4.21 Browsing, Preview and Histogram
- 4.22 Image Rating
- 5 Settings
- 6 Phocus
- 7 Accessories
- 8 Appendix
X1D II 50C USER GUIDE www.hasselblad.com
56
FUNCTIONS
Contents
SETTINGS ON THE CONTROL SCREEN
Exposure Adjust
- Adjust Flash Exposure by sliding right or left.
- Adjust Exposure by sliding right or left.
Tapping the line to the left or right of the dot, will
increase or decrease the value with the value set
in
Main Menu > Camera Settings > Exposure >
Increment Step Size > exposure Adjust
.
Reset the value to zero by double-tapping the icon to
the left of the line.
Exposure Mode
M Manual Mode.
A Aperture Priority Mode.
S Shutter Priority Mode.
P Program Mode.
Note!
Exposure Mode can only be set from the Control
Screen when the Mode Dial is set to C1, C2 or C3.
Metering Mode
- Centre Weighted.
- Spot.
- Centre Spot.
This chapter continues on the next page.
Exposure Adjust
Exposure Mode
Metering Mode