User manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Lenses
- 4 Functions
- 4.1 Parts, Components, Buttons and Controls
- 4.2 Grip Buttons and Controls
- 4.3 Camera Body Buttons and Controls
- 4.4 Mode Dial
- 4.5 Exposure Program Modes
- 4.6 The X1D II Interaction Displays
- 4.7 Touch Display Navigation
- 4.8 Navigating the Menus
- 4.9 Touch Display Main Menu
- 4.10 Control Screen
- Locked Exposure Parameters on the Control Screen
- Settings on the Control Screen
- Self Timer settings
- Interval settings
- Interval Operation
- Exposure Bracketing settings
- Exposure Bracketing Operation
- Long Exposure Screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed Exposure Compensation Setting
- Exposure Compensation / Quick Adjust
- Light Meter Mode
- 4.11 Video Recording
- 4.12 Connector Ports
- 4.13 Memory Cards
- 4.14 Stop Down Button
- 4.15 Live View indications
- 4.16 Focusing
- 4.17 Move Autofocus Point
- 4.18 Resize Autofocus Point
- 4.19 Move Autofocus Point using Touchpad
- 4.20 Change Settings on the Grip
- 4.21 Browsing, Preview and Histogram
- 4.22 Image Rating
- 5 Settings
- 6 Phocus
- 7 Accessories
- 8 Appendix
X1D II 50C USER GUIDE www.hasselblad.com
53
FUNCTIONS
Contents
A
1
B
2
C
D
E
SETTINGS ON THE CONTROL SCREEN
White balance
- Auto white balance AWB.
- Cloudy.
- Shade.
- Daylight.
- Tungsten.
- Fluorescent.
- Flash.
- Manual white balance MWB
- Picker (select white balance from image).
Change white balance preset
On the control screen, tap the white balance icon in the top
left corner. This brings up the white balance setting screen (
1
).
Tap on one of the white balance icons to select it (
A
). The right
frame of the screen (
B
) will show the values for Temperature
and Tint associated with the selected white balance. Tap the
white balance icon again to select it and return to the control
screen.
Setting manual white balance values
From white balance setting screen (
1
), change value for
Temperature or Tint by tapping in the right frame (
B
).
Tap the value (
C
) to change and select a new value from the
list (
D
).
Tap the left arrow (
E
) to return to the white balance setting
screen (
1
). Finally, tap the manual white balance icon again to
select it and return to the control screen (
2
). White balance
has now been set to Manual mode.
Note!
You can also set ISO and white balance from the Live View
screen. See 83.
Note!
Whenworkingwithashinsituationswherethesubjectislit
with a different color temperature it is a good practice to set
the camera to Auto white balance.
Temp [ºK] Tint
Cloudy
6500 10
Shade
7500 10
Daylight
5500 10
Tungsten
2850 0
Fluorescent
3800 21
Flash
5500 0
Manual
Variable
2000 to 10000
Variable
-100 to 100