User manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Lenses
- 4 Functions
- 4.1 Parts, Components, Buttons and Controls
- 4.2 Grip Buttons and Controls
- 4.3 Camera Body Buttons and Controls
- 4.4 Mode Dial
- 4.5 Exposure Program Modes
- 4.6 The X1D II Interaction Displays
- 4.7 Touch Display Navigation
- 4.8 Navigating the Menus
- 4.9 Touch Display Main Menu
- 4.10 Control Screen
- Locked Exposure Parameters on the Control Screen
- Settings on the Control Screen
- Self Timer settings
- Interval settings
- Interval Operation
- Exposure Bracketing settings
- Exposure Bracketing Operation
- Long Exposure Screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed Exposure Compensation Setting
- Exposure Compensation / Quick Adjust
- Light Meter Mode
- 4.11 Video Recording
- 4.12 Connector Ports
- 4.13 Memory Cards
- 4.14 Stop Down Button
- 4.15 Live View indications
- 4.16 Focusing
- 4.17 Move Autofocus Point
- 4.18 Resize Autofocus Point
- 4.19 Move Autofocus Point using Touchpad
- 4.20 Change Settings on the Grip
- 4.21 Browsing, Preview and Histogram
- 4.22 Image Rating
- 5 Settings
- 6 Phocus
- 7 Accessories
- 8 Appendix
X1D II 50C USER GUIDE www.hasselblad.com
INTRODUCTION
Contents
16
A
B
C
1.11 CHARGING THE BATTERY
BATTERY CHARGER
The X1D II is supplied with a USB power adapter for charging
the camera battery through the USB port of the camera.
CHARGE THE BATTERY
Turn off the camera and insert the USB-C plug from the
battery charger into the USB socket on the camera
(A)
. Insert
the battery charger into a standard (100–240V~ /50–60 Hz)
domestic socket.
CHARGING FROM THE USB PORT
When the battery is charging, the Status Led
(B)
indicates
the current charge level by blinking with Orange color. See
illustration to the right. E.g. if the battery has about 50%
charge level, the LED will blink two times and then be turned
off for a short period. The blinking sequence is repeated.
See also Battery Charging Hub accessory on page 153.
BATTERY WARNING AND CAMERA SHUT-DOWN
When capacity battery reaches 17%, the battery symbol on
the control screen and in live view will change to red color
(C)
.
At 0%, the camera will shut down completely.
Note!
The camera can show current battery capacity in % on the
control screen by activating the setting as described on page
131.
One blink = 0% to 25%.
Two blinks = 26% to 50%.
Three blinks = 51% to 75%.
Four blinks = 76% to 95%.
Steady light, 4 sec. = 95% to 100%
17%