User manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Lenses
- 4 Functions
- 4.1 Parts, Components, Buttons and Controls
- 4.2 Grip Buttons and Controls
- 4.3 Camera Body Buttons and Controls
- 4.4 Mode Dial
- 4.5 Exposure Program Modes
- 4.6 The X1D II Interaction Displays
- 4.7 Touch Display Navigation
- 4.8 Navigating the Menus
- 4.9 Touch Display Main Menu
- 4.10 Control Screen
- Locked Exposure Parameters on the Control Screen
- Settings on the Control Screen
- Self Timer settings
- Interval settings
- Interval Operation
- Exposure Bracketing settings
- Exposure Bracketing Operation
- Long Exposure Screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed Exposure Compensation Setting
- Exposure Compensation / Quick Adjust
- Light Meter Mode
- 4.11 Video Recording
- 4.12 Connector Ports
- 4.13 Memory Cards
- 4.14 Stop Down Button
- 4.15 Live View indications
- 4.16 Focusing
- 4.17 Move Autofocus Point
- 4.18 Resize Autofocus Point
- 4.19 Move Autofocus Point using Touchpad
- 4.20 Change Settings on the Grip
- 4.21 Browsing, Preview and Histogram
- 4.22 Image Rating
- 5 Settings
- 6 Phocus
- 7 Accessories
- 8 Appendix
X1D II 50C USER GUIDE www.hasselblad.com
141
SETTINGS
Contents
File Counter Reset Dialogue
RESET FILE COUNTER
MAIN MENU > GENERAL SETTINGS >
SERVICE > FILE COUNTER
1 Press the General Settings icon on the
Touch Display.
2 The General Settings Menu appears.
3 Press the Service Menu.
4 Select
Reset
under File Counter.
Swipe right or press the Menu / EXIT
button to get back to the Main Menu.
How to Reset the File Counter:
1 Press MENU.
2 Navigate to General Settings.
3 Navigate to Service.
4 Under File Counter, select Reset.
A dialogue will appear asking for
conrmation.
5 Press OK.
6 After conrmation, the File Counter
will be reset and the next captured
image (or video recording) will be
numbered B00000001.
7 If the current folder on the memory
card is not empty when a Reset is
performed, a new folder will be
created on the memory card. This is
done to avoid the possibility of two
captured images being labelled with
the same name and le number.
Note!
A new folder is created if there are images
present on any inserted active SD memory
Card.
Service Menu
Conrm dialogue