User manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Lenses
- 4 Functions
- 4.1 Parts, Components, Buttons and Controls
- 4.2 Grip Buttons and Controls
- 4.3 Camera Body Buttons and Controls
- 4.4 Mode Dial
- 4.5 Exposure Program Modes
- 4.6 The X1D II Interaction Displays
- 4.7 Touch Display Navigation
- 4.8 Navigating the Menus
- 4.9 Touch Display Main Menu
- 4.10 Control Screen
- Locked Exposure Parameters on the Control Screen
- Settings on the Control Screen
- Self Timer settings
- Interval settings
- Interval Operation
- Exposure Bracketing settings
- Exposure Bracketing Operation
- Long Exposure Screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed Exposure Compensation Setting
- Exposure Compensation / Quick Adjust
- Light Meter Mode
- 4.11 Video Recording
- 4.12 Connector Ports
- 4.13 Memory Cards
- 4.14 Stop Down Button
- 4.15 Live View indications
- 4.16 Focusing
- 4.17 Move Autofocus Point
- 4.18 Resize Autofocus Point
- 4.19 Move Autofocus Point using Touchpad
- 4.20 Change Settings on the Grip
- 4.21 Browsing, Preview and Histogram
- 4.22 Image Rating
- 5 Settings
- 6 Phocus
- 7 Accessories
- 8 Appendix
X1D II 50C USER GUIDE www.hasselblad.com
131
SETTINGS
Contents
A
Battery percent value shownBattery percent value not shown
Indication of active USB power.
General Settings Menu
Power Settings Menu
POWER
MAIN MENU > GENERAL SETTINGS >
POWER
1 Press the General Settings icon on
the Touch Display.
2 The General Settings Menu
appears.
3 Press the Power Menu.
Swipe right or press the Menu / EXIT
button to get back to the Main Menu.
1
1
Power Settings
Power Off
Sets the time before the camera
automatically turns off.
Choose between:
5 min, 10 min, 30 min, Never.
Power Off when Tethered
Sets the time before the camera
automatically turns off when
connected to a computer.
Choose between:
5 min, 10 min, 30 min, Never.
Power from Computer USB
When checked, the camera will take
power from the USB device. This is
indicated by a symbol
(A)
next to
the battery on the Control Screen
and on the Live View screen.
Control Screen
Show battery Percentage setting
When the box is checked, an
approximate value of the battery
charge level in percent is shown
next to the battery icon on the
control screen.
Note!
The camera will only be partially
powered from USB. A charged camera
battery is still required.
Note!
Only power from a USB Host device is
supported.