User manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Lenses
- 4 Functions
- 4.1 Parts, Components, Buttons and Controls
- 4.2 Grip Buttons and Controls
- 4.3 Camera Body Buttons and Controls
- 4.4 Mode Dial
- 4.5 Exposure Program Modes
- 4.6 The X1D II Interaction Displays
- 4.7 Touch Display Navigation
- 4.8 Navigating the Menus
- 4.9 Touch Display Main Menu
- 4.10 Control Screen
- Locked Exposure Parameters on the Control Screen
- Settings on the Control Screen
- Self Timer settings
- Interval settings
- Interval Operation
- Exposure Bracketing settings
- Exposure Bracketing Operation
- Long Exposure Screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed Exposure Compensation Setting
- Exposure Compensation / Quick Adjust
- Light Meter Mode
- 4.11 Video Recording
- 4.12 Connector Ports
- 4.13 Memory Cards
- 4.14 Stop Down Button
- 4.15 Live View indications
- 4.16 Focusing
- 4.17 Move Autofocus Point
- 4.18 Resize Autofocus Point
- 4.19 Move Autofocus Point using Touchpad
- 4.20 Change Settings on the Grip
- 4.21 Browsing, Preview and Histogram
- 4.22 Image Rating
- 5 Settings
- 6 Phocus
- 7 Accessories
- 8 Appendix
X1D II 50C USER GUIDE www.hasselblad.com
121
SETTINGS
Contents
CONNECTIVITY SETTINGS
MAIN MENU > GENERAL SETTINGS > CONNECTIVITY
1 Press the General Settings icon on the Touch Display.
2 The General Settings Menu appears.
3 Press the Connectivity Settings Menu.
Swipe right or press the Menu / EXIT button to get back to the Main Menu.
USB Settings
Tethering Mode
Select Mac/PC or iOS.
If the camera is connected via USB to an iOS device, select
iOS
. For
connection to a computer select
Mac/PC
.
Wireless Settings
Wi-Fi
Select
On
or
Off
.
Mode
Select between
2.4
and
5 GHz
.
Note!
Some regions do not allow Wi-Fi/5 GHz Wi-Fi.
SSID
The identity of the camera on the Wireless network.
Password
Use this password to connect via Wi-Fi to the camera from the Phocus
Mobile 2 App.
Change Password
Press this button to generate a new password.
Remove Paired Devices
Removes all devices that have been paired over Bluetooth for auto-con-
nection with the Phocus Mobile 2 App. The number within brackets
represents the current number of paired devices. If the button is greyed
out, no devices have been paired. Press Remove (Rectangle button,
) to conrm or Exit (Cross button, ) to return without removing any
device.
Note!
The display timeout will temporary be increased to 60 seconds when
enabling Wi-Fi. If user touches the screen or press any key during this 60
second timeout the display timeout will be restored to normal value.
Connectivity Settings Menu
Remove Paired Devices dialogue