User manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Lenses
- 4 Functions
- 4.1 Parts, Components, Buttons and Controls
- 4.2 Grip Buttons and Controls
- 4.3 Camera Body Buttons and Controls
- 4.4 Mode Dial
- 4.5 Exposure Program Modes
- 4.6 The X1D II Interaction Displays
- 4.7 Touch Display Navigation
- 4.8 Navigating the Menus
- 4.9 Touch Display Main Menu
- 4.10 Control Screen
- Locked Exposure Parameters on the Control Screen
- Settings on the Control Screen
- Self Timer settings
- Interval settings
- Interval Operation
- Exposure Bracketing settings
- Exposure Bracketing Operation
- Long Exposure Screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed Exposure Compensation Setting
- Exposure Compensation / Quick Adjust
- Light Meter Mode
- 4.11 Video Recording
- 4.12 Connector Ports
- 4.13 Memory Cards
- 4.14 Stop Down Button
- 4.15 Live View indications
- 4.16 Focusing
- 4.17 Move Autofocus Point
- 4.18 Resize Autofocus Point
- 4.19 Move Autofocus Point using Touchpad
- 4.20 Change Settings on the Grip
- 4.21 Browsing, Preview and Histogram
- 4.22 Image Rating
- 5 Settings
- 6 Phocus
- 7 Accessories
- 8 Appendix
X1D II 50C USER GUIDE www.hasselblad.com
100
FUNCTIONS
Contents
A
B
C
D
Rating Mode - Unrated
4.22 IMAGE RATING
RATING FUNCTION
Images on the memory card, can be rated from 1 to 5 Stars.
Theratingiswrittentothemeta-dataoftheimagele.Use
the following procedure.
1 Make sure that the setting “Image Rating” in the “Camera
Settings-Conguration”menuischecked.Seepage118.
2 Press the Play button to enter Browse Mode.
3 Select the Capture Details overlay by pressing the Display
Button or by rotating the rear Scroll Wheel (A).
4 In the lower right part, the 5 stars (B) show the current
rating.Foranunratedimage,nostarsarelled.
5 Toratetheimage,tapthevestars(B)orpresstheStar
Button.
6 ThecameraentersRatingMode,showingvelargestars.
If the image has been rated before, it will show the current
rating,otherwise,thevestarswillbeempty.
7 Tap the desired star to change rating. E.g. if you want a
4-star rating, tap the fourth star (C). The Rectangle Button
increases rating and the Cross Button decreases rating.
You can also use the rear Scroll Wheel to change rating.
8 To return to Browse Mode (D), press the Star Button or the
Browse Button again.
Rating Mode is equivalent to standard Browse Mode, which
means that you can browse to the next image by swiping the
display or using the front Scroll Wheel. Double-tap the screen
or press AF-D to Zoom-in.
You can always go back to a previously rated image and
change rating following the same procedure as above.
Note!
Foranefcientworkowwhileratingmanyimages,stayin
Rating mode and swipe to the next or previous image. It is
also possible to use the front scroll wheel to go to the next or
previous image while in Rating mode.
Note!
Imagescapturedwithearlierrmwarethan1.2.0cannotbe
rated.
Note!
If Image rating is deactivated in the setting “Camera Settings
/Conguration/ImageRating”,thevestarsinBrowseMode
(A) will not be visible.
Note!
If two cards are inserted, only images on the primary card are
rated.
Browse mode - Capture Details Overlay
Rating Mode - Rated 4 stars
Browse Mode - Rated 4 stars.