User manual
ENG
30
Notes on recording/playback
• Before you start recording, make a trial recording to make sure that the camera is working cor-
rectly.
• e camera is neither dust-proof, nor splash-proof, nor water-proof.
• Avoid exposing the camera to water. If water enters inside the camera, a malfunction may occur.
In some cases, the camera cannot be repaired.
• Do not aim the camera at the sun or other bright light. It may cause the malfunction of the
camera.
• If moisture condensation occurs, remove it before using the camera.
• Do not shake or strike the camera. It may cause a malfunction and you may not be able to record
images. Furthermore, the recording media may become unusable or image data may be damaged.
Do not use/store the camera in the following places
• In an extremely hot, cold or humid place
In places such as in a car parked in the sun, the camera body may become deformed and this may
cause a malfunction.
• Storing under direct sunlight or near a heater
e camera body may become discolored or deformed, and this may cause a malfunction.
• In a location subject to rocking vibration
• Near a location that generates strong radio waves, emits radiation or is strongly magnetic place.
Otherwise, the camera may not properly record or play back images.
• In sandy or dusty places
Be careful not to let sand or dust get into the camera. is may cause the camera to malfunction,
and in some cases this malfunction cannot be repaired.
On carrying
Do not sit down in a chair or other place with the camera in the back pocket of your trousers or
skirt, as this may cause malfunction or damage the camera.
Carl Zeiss lens
e camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with
exellent contrast. e lens for the camera has been produced under a quality assurance system
certied by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany.
Notes on the screen
e screen is manufactured using extremely high-precision technology so over 99.99% of the pixels
are operational for eective use. However, some tiny black and/or bright dots (white, red, blue or
green) may appear on the screen. ese dots are a normal result of the manufacturing process, and
do not aect the recording.