User manual

ENG
11
• If the Power/Charge lamp on the camera ashes when the AC Adaptor is connected to the
wall outlet (wall socket), this indicates that charging is temporarily stopped because the
temperature is outside the recommended range. When the temperature gets back within
the appropriate range, the charging resumes. We recommend charging the battery pack in
an ambient temperature of between 10°C to 30°C (50ºF to 86ºF).
• e battery pack may not be eectively charged if the terminal section of the battery is
dirty. In this case, wipe any dust o lightly using a so cloth or a cotton swab to clean the
terminal section of the battery.
• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If malfunctions
occur while using the AC Adaptor, disconnect the plug from the wall outlet (wall socket)
immediately to disconnect from the power source.
• When charging is nished, disconnect the AC Adaptor from the wall outlet (wall socket).
• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied) and AC
Adaptor (supplied).
Charging time (Full charge)
e charging time is approximately 155 min. using the AC Adaptor (supplied).
• e above charging time applies when charging a fully depleted battery pack at a tem-
perature of 25°C (77°F). Charging may take longer depending on conditions of use and
circumstances.
Notes
Notes
Connect the AC Adaptor to the wall outlet (wall socket).
e Power/Charge lamp lights orange, and charging starts.
Turn o the camera while charging the battery.
You can charge the battery pack even when it is partially charged.
When the Power/Charge lamp ashes and charging is not nished, remove and re-
insert the battery pack.
2