Handbook

Table Of Contents
57
GB
Shooting a clear image without camera
shake
Camera shake” refers to unwanted movement of the camera that occurs aer the
shutter button has been pressed, resulting in a blurred image. To reduce camera
shake follow the instructions below.
Camera shake warning indicator
In situations where the camera may
be subject to camera-shake, the
(Camera shake warning) indicator
ashes. In this case, use a tripod or the
ash.
(C
amera shake warning)
indicator
Note
e camera shake warning indicator does not appear in the following situations:
- e exposure mode is set to M/S, or during movie recording.
- When the viewing mode is set to [No Disp. Info.], [Level], or [Histogram].
Using the SteadyShot function
e SteadyShot function is available with this camera to reduce camera shake. e
SteadyShot function can be set separately for still image shooting and for movie
recording.
e SteadyShot function is set to [On] for still image shooting and [O] for movie
recording in the default settings.
MENU button " 3 or 1 " [SteadyShot] " Select the desired setting
You can also set the SteadyShot function used for still image shooting from the
Quick Navi screen (page28).